2023 NEW 30cm width textile T-shirt dtf printer with shake powder in one machine

Heat transfer machine operation process: adjust the time controller to the required time, put the transferred clothing on the lower ironing board, and then put the heat transfer paper (pay attention to the front and back of the heat transfer paper), press the handle down forcefully, Till the end.

If the lower plate is iron plate or other materials, it will be easily deformed and aging if it works in a high temperature and high pressure environment for a long time.

TODOjet offer you a brand new solution of digital PET transfer film color printing
-Saving Manpower
-No Engraving
-Widely Usage
-User Friendly
-No Waste Discharging

Simple and easy operation
1. Select a picture
2. Click Print
3. Heat press machine
4. Finish the finished product

When the UV flatbed printer nozzle is used for a long time, it is easy to ink on the surface area. If left alone, after a long time, the nozzle will easily become clogged. There are generally five causes of this phenomenon. Depending on the design of the UV flatbed printer from different manufacturers, there may be 7 or 4 phenomenon, but mastering these five can basically solve more than 90% of the ink accumulation problem.

1. A variety of fabric printing to meet your needs
2. All fabrics such as knitted, textile, nylon, non-woven, Oxford cloth can be hot stamped
3. You can easily achieve photo-level effects

Adjust the thermostat and timer of the heat press machine to the desired temperature and time.
1.Lay the substrate flat on the silicone plate, then place the offset heat transfer drawing on the substrate, and press the handle down firmly until it is completely closed.
2.When the time indicated for hot stamping is up, the buzzer will sound, and the handle will be lifted back to its original position.
3.If it is cold torn, the heat transfer paper should be torn off after cooling; if it is hot torn, the heat transfer paper should be torn off immediately after the hot stamping is completed.

1. Roll-to-roll printer products represent the wave of inkjet printing in the 21st century.

2. New ink spray printing method – the computer directly outputs inkjet to create higher printing.

3. The roll-to-roll printer is a “non-contact with the object” inkjet printing type — digital printing equipment

The early heat transfers are not so much heat transfers as they are heat transfers. They are mainly popular slogans and characters. Later, they gradually developed into various vivid patterns.

UV printing is environmental friendly while producing the crisp image on the printed paper boxes and gift paper boxes. Below are the benefits of the UV printing and inks.Faster turnaround time: UV inks dry instantly on the press when exposed to the UV light.Zero VOC release: unlike the conventional inks containing the chemical solvents, the UV inks release no volatile organic compounds, which is abbreviated to VOC. Extra protection of the printing because of the better resistance to smudge and abrasion.Crisp look to the printed text and graphics on the paper box and bag.

TODOjet DTF printer factory can offer you one-stop solutions like hot melt powder,PET film and pigment ink.We have different pacakge of hot melt powder like 1KG,2KG,5KG and 25KG. Also we have black hot melt powder for your option! For more DTF printer consumables,welcome contact with us!

Powder shaking machine usually together with our 60cm DTF printer, it can keep continous automatic dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer. After curing, you can store the printed PET film for heat transfer use.These released PET films are suitable for any fabric garment printing, like T-shirt printing,chemical fiber, non-woven fabric printing,linen printing,canvas printing,leather printing,silk printing,etc.

Symptoms of poor ink output from uv flatbed printers are: flying ink, dripping ink, drawing and so on. There are roughly eight kinds of reasons that cause this kind of failure. In actual application, the UV flatbed printer design varies from different manufacturers. Some may have 10 reasons, and some may have 6 reasons. But mastering the following 7 kinds can solve the problem that 99% of the nozzles have poor ink discharge.

The white color set is accurate, and the 1mm small characters are high-definition without strokes;
No stroke, hollow out, no need to open the plate, one piece of printing;
Suitable for any fabric, do it together with light and dark fabrics, print what you want;
Small footprint, one person operation, high temperature and water resistance!

Printer Button Panel: Simplified Layout and Easy-to-understand Operation
Dusting motor: stepless speed regulation shakes powder cleanly
Smoke exhaust area: can be matched with a smoking machine, which is environmentally friendly and pollution-free

A3 DTF Printer, Our Latest A3DTF Printer is Officially Released. Direct to Film printing, or DTF, is a new technology that allows users to print designs onto special films. And then do heat transfer in any fabric，A very good way to do for every craft and DIY.

When it comes to nozzles, the first thing everyone thinks of is the printer. The well-known printers are HP, Epson, Canon, Lenovo, Brother, Samsung and so on. These printers are now office type printers.

Inkjet technology utilizes tiny droplets of ink to facilitate direct printing without the device coming into contact with the printing surface. Because the technology supports non-contact printing, it can be applied to a variety of media and is now being introduced into a wide range of fields from general-purpose to industrial.

1. Simple control buttons
The key functions are clear and easy to operate, just one touch
2. Four-color printing
The colors are more vivid and rich, and the hot stamping effect is good

The poor adhesion of the material pattern of the UV flatbed printer is a headache. The printed pattern is peeled off with a slight scratch. Even if the printing effect is even better, it has no shelf life and practicality. There are six reasons for this: temperature and humidity relations, ink deterioration, material problems, UV lamp problems, too fast speed,the ink is not dry, and residual cleaning liquid.

UV inks used in UV printers can be divided into hard ink and soft ink according to the hardness properties of the printing material. Rigid, non-bending, non-deforming materials such as glass, ceramic tile, metal plate, acrylic, wood, etc., use hard ink; elastic, bendable, twisting materials such as leather, soft film, soft PVC, etc., Use soft ink.

Wide color gamut and high color reproduction:Print what you want, and give you a more real experience with full colors High-speed printing without manual after-sales worry-free High-speed printing mass production

When something temporarily leaves for a short time and no longer operates, the UV flatbed printer is set to the standby state, and the x-axis and y-axis are also static. If the x-axis carriage movement is found, it means that the fiber cable is damaged or loose.

RGB color model refers to the three primary colors of light: Red, Green, and Blue,the three primary color light with different proportions of the sum, can produce a variety of color light, in theory, red, green, blue light can be mixed out of all colors.

When the temperature gets colder every year, the number of failures of UV printers will also increase. It is mainly concentrated in four aspects: blockage and disconnection of nozzles, solidification and condensing of consumables, electrostatic interference, and unstable voltage. How to prevent these situations in advance?

1. Printed pictures have horizontal lines
2. Large color deviation
3. The edge of the picture is blurred and ink is flying
4. Printed pictures are scattered with small ink dots
5. There is ghosting in the horizontal printing
6. Printing dripping or broken ink

Accuracy: Variable Droplet High Quality Printing
Variable Droplets for Beautifully Smooth Gradients: Features a variable droplet feature that prints ink into 3 different sizes of droplets at once

Advantage:
-Steady peel strength
-Anti static coating treatment
-Competible water based ink
-Bright color, non-stick powder
-Azo free, oeko-tex standard

TODOjet UV ink is formulated to produce vibrant colors using Cyan, Magenta, Yellow, Black, White, and Varnish.
Combined, this UV inkjet ink enables companies to achieve full-color graphics and images on a wide variety of flat and cylindrical objects.

TODOjet UV ink can be used in practically any UV printers.

Adheres to a wide variety of rigid substrates including glass, plastic, and metal

CMYK + W + V available

UV flatbed printer UV lamp belongs to one of the core components of the device. Its main function is to ensure that the UV ink adheres to the pattern surface and can be dried quickly and completely to prevent the pattern from discoloring and falling off. During long-term use, whether it is natural aging of parts or improper manual operation, it will cause fault. There are four common faults: the uv lamp is dimmed, the uv lamp is not off, the uv lamp is not on, and the uv lamp has a wrong lighting distance.