A3 30cm width DTF direct to film with powder shaker heat press impresora for t-shirt Garment Printer

3D stereoscopic
3D stereoscopic suede visual effect, soft and comfortable to the touch, no fading, no odor, strong three-dimensional sense.
Thick plate silicone
The feel is concave and convex, the texture is strong, giving people a relatively novel high/end feeling. Strong, washable and wear-resistant
Customizable
There are 3 conventional colors, and other colors can be customized by samples or color numbers.

Things to note:

1. The finished UV film must be trial-printed before mass production. After the trial printing is qualified, mass production can be carried out.

2. Unused UV film products should be bagged and sealed. Make sure the products are dry and do not store them exposed to moisture and high temperatures.

3. This product information is true and accurate. AGP declares that it does not assume any liability for incidental or consequential losses;

Applicable medium: nylon, chemical fiber, cotton, leather, swimsuit, wetsuit, PVC, EVA, etc.
Powder control: powder shaking control, dusting control, direction, amount control
Rewinding function: automatic induction rewinding

The craftsmanship level of the clothing customization industry shows a trend of continuous evolution and development. The addition of a variety of new custom materials has broken the stereotyped custom style in the industry and created several craft combinations. While on-demand printing is gradually accepted by the public, printing technology has also received more attention.

Advantages
1.With timing function, automatic sound &light alarm after completion
2.With lock catch and sealing strip
3.Excellent heat preservation
4.Rapid temperature rise
5.Up to 6 heating tubes
6.Ensure that every corner of the full width can melt
7.It makes the image quality and firmness transferred to the fabric better

Wi-Fi wireless printing, place it wherever you want, support Epson iPrint to realize a variety of printing applications, and easily share. Support Email Print: You can set an email address for the printer, send Email to the printer, and then print.

When the temperature gets colder every year, the number of failures of UV printers will also increase. It is mainly concentrated in four aspects: blockage and disconnection of nozzles, solidification and condensing of consumables, electrostatic interference, and unstable voltage. How to prevent these situations in advance?

TODOjet is a good UV printer supplier in China,we have full series small UV printers with good quality.In order to let more customers know our printers and lastest technology,we attend many exhibitions every year, such as DPES expo in Guangzhou, APPP Expo and Sign China Expo in Shanghai. We also attend many famous oversea exhibitions in printing field, such as FESPA exhibition, SGI exhibition,etc. We have 100 pcs A3 UV DTF Film A and film B with high quality .

The UV Printing process involves special inks that have been formulated to dry quickly when exposed to ultraviolet (UV) light. As the paper (or other substrate) passes through the printing press and receives wet ink, it is immediately exposed to UV light.Please note that this technology required varnish printing, and its better use hard or neutral ink. The printing effect of uv film is more beautiful, and the colors are bright and diverse. Can be used on irregular hard surfaces.

1. Significant Saving on printing cost.
2. Environmentally protective, no waste ink.
3. Smooth ink flow for better printing quality.

Main products of TODOjet
DTF Printer and DTF Powder Oven (A3,60cm,120cm size) Widely used to customize the T-shirt, hoodie, scokes, shoes, bags, etc.

UV Flatbed Printer (3050,6040,UV6090,UV1350) Widely used in textile, plastic sheet, metal plate, acrylic sheet, wood board, leather, glass, phone case, ceramic tile, etc.

All kind of consumables for DTF solution DTF powder, DTF ink, DTF film, UV ink, UV AB film, etc

UV flatbed printer UV lamp belongs to one of the core components of the device. Its main function is to ensure that the UV ink adheres to the pattern surface and can be dried quickly and completely to prevent the pattern from discoloring and falling off. During long-term use, whether it is natural aging of parts or improper manual operation, it will cause fault. There are four common faults: the uv lamp is dimmed, the uv lamp is not off, the uv lamp is not on, and the uv lamp has a wrong lighting distance.

The most widely used laser films on the market mainly include laser iridescent film, laser dielectric film, transparent laser film, laser dielectric film, etc.

TODOjet is a professional DTF printer supplier,we can also offer you one stop solution with related consumables, such as pigment ink, pet film, powder machine,and hot melt powder etc.If you have good quantity,we can offer you wholesale price.

Garment printers can print on various rolls or sheets of materials, such as: thermal transfer film, film, self-adhesive, PU film, etc. At present, the most popular application is in the clothing industry.

1. More choices on dark colored fabric
2. Reducing your production cost
3. Better print out on performance
4. Environmental friendly

A3 DTF Pro textile printer is widely used for different products, for example T-shirt, hats, shoes, bags. It requires a DTF printer, a shake powder machine and a heat press to get final products. Since it is cost effective, small size and environmentally friendly, customers who want to start new business are very interested in it.

1.Universal matching, easy to use, small size, time-saving and labor-saving
2. Suitable for digital printing and other industries
3. Digital offset heat transfer, one-piece molding
4. No engraving, no waste discharge, no white edge, environmental protection
5. Timing control switch, timing at will
6. Full body sheet metal design, durable and durable
7. Comes with a baking tray limit device, which is more convenient
8. Equipped with power fuse device, more assured to use

1. keep the machine clean:keep the important parts of the machine clean, can not be stained with oil and dust, keep the hot transfer film clean, can not be stained with fingerprints and dust, keep the bearing products clean, no dust, oil, keep the hands clean, no oil, no sweat.
2.hot stamping pressure:hot stamping pressure must be adjusted to the most appropriate, otherwise too big and easy to hurt the glue head and be hot material, too small and affect the hot stamping effect.The pressure shall be locked after adjusting to the best stamping pressure to avoid change in mass production.
3. hot temperatureIt is easy to damage the bearing material, too low hot temperature may not be able to reach the normal transfer printing.Hot temperature should be determined by the bearing material, flower film, heat transfer machine, these factors, different materials have different hot temperature.
4.hot stamping speed:hot stamping time (speed) should be determined according to the specific hot stamping, in the case of ensuring the hot stamping effect, the faster the speed, the higher the production efficiency, but some products due to some special conditions must use slow speed

Definition of Flocking Heat Transfer

Flocking heat transfer is a process that uses high-quality flock paper to create patterns with a plush, three-dimensional appearance. The flock feels soft and ranges in height from 0.6 to 1.2mm. This technique includes multi-color flocking and glitter flocking, which are at the forefront of the industry. Flocking heat transfer is widely used in various applications, such as women’s clothing, sportswear, children’s clothing, plush toys, and sweaters.

There are 8 reasons for the failure of the uv flatbed printer, and there are 8 reasons for it. According to the difference in the design of uv flatbed printers of different manufacturers, there may be 10 reasons. There may be 6 different reasons. However, mastering the following 8 types can solve 99% of the failures of the nozzles not producing ink.

To understand the market prospects of UV printers, we can start from the three aspects of UV printer equipment itself, the materials that can be printed, and the applied industry.

Advantage of UV led ink:
Environmental: no solvents penetrate, ink safety, no waste.
Durable, indoor 10 years, outdoor 3 years.
Robust image, cured graphic
Dry quickly, fast processing.
Direct to rigid uncoated substrates.
To any flat rigid substrates, even small arcuated surface. Can print on flexible substrate like canvas.
shelf life 6 month for white ink, other colors 1 year

Do I need an A3 laminator? If you want to laminate small or medium-sized documents such as recipe cards, ID tags or up to A4 size documents, then an entry width, such as an A3 laminating machine, is all that is required. Especially for larger documents or items up to A3 size, a wide format laminator such as A3 laminating machines is ideal.

UV flatbed printer print head heating does not heat up, it will directly affect the normal ink out of UV ink, leading to ink cut-off during printing. Especially when the temperature in winter is low, the fluency of UV ink is far less than that in summer. At this time, not only the equipment nozzles and UV ink need to be heated, but the external working environment also needs a suitable temperature. The suitable ambient temperature for UV flatbed printers is between 15° C and 25° C, and the humidity is between 40% and 70%. There are 6 kinds of reasons that the nozzle does not heat up, and it is easy to solve.

1. Roll-to-roll printer products represent the wave of inkjet printing in the 21st century.

2. New ink spray printing method – the computer directly outputs inkjet to create higher printing.

3. The roll-to-roll printer is a “non-contact with the object” inkjet printing type — digital printing equipment

TODOjet is a professional manufacture of DTF printer,we can also offer you heat transfer pet film powder dusting, shaking and heating machine. Printed film can be heat transferred on any kind of fabrics.

As Christmas approaches, most users’ UV flatbed printers will face a non-use state for more than 7 days. Coupled with the influence of the cold weather in winter, the maintenance of the equipment will be more thorough and comprehensive than usual. This article mainly discusses how to maintain the nozzle, core components, and external environment.

There are three main misunderstandings in the speed of UV flatbed printers: theoretical speed, speed in different modes, and actual production speed. What needs to be understood is that the speed in most sales man mouths only refers to the theoretical speed. A few professionals will mention the speed in different modes, but these are not the actual production speeds. The gap in the middle is at least Times to calculate.

1. The compatibility between the main board of the printer and the print head/software is more stable
⒉ Board waveform corresponds to more precise color management and lower deviation
3. The printing of the white color nozzle is not offset, and the accuracy is higher
4. The life of the print head is more durable, and it is not easy to break the ink and pull the wire
5. The official after-sales service group can track and reply at any time