AGP 30cm 60cm wide UV transfer film gold film silver film AB film suitable for irregular object surfaces

Things to note:

1. The finished UV film must be trial-printed before mass production. After the trial printing is qualified, mass production can be carried out.

2. Unused UV film products should be bagged and sealed. Make sure the products are dry and do not store them exposed to moisture and high temperatures.

3. This product information is true and accurate. AGP declares that it does not assume any liability for incidental or consequential losses;

Printer Button Panel: Simplified Layout and Easy-to-understand Operation
Dusting motor: stepless speed regulation shakes powder cleanly
Smoke exhaust area: can be matched with a smoking machine, which is environmentally friendly and pollution-free

To understand the market prospects of UV printers, we can start from the three aspects of UV printer equipment itself, the materials that can be printed, and the applied industry.

This powder shaking machine usually together with our 60cm DTF printer, it can keep continous dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer. After curing, you can store the printed PET film for heat transfer use.These released PET films are suitable for any fabric garment printing, like T-shirt printing,chemical fiber, non-woven fabric printing,linen printing,canvas printing,leather printing,silk printing,etc.

3D stereoscopic
3D stereoscopic suede visual effect, soft and comfortable to the touch, no fading, no odor, strong three-dimensional sense.
Thick plate silicone
The feel is concave and convex, the texture is strong, giving people a relatively novel high/end feeling. Strong, washable and wear-resistant
Customizable
There are 3 conventional colors, and other colors can be customized by samples or color numbers.

After the pattern is printed by the DTF Printer, the powder shaking machine is used to evenly shake the hot melt powder on the white ink part, and then heat and dry, and the finished hollow heat transfer can be printed directly. And it can be customized one by one, so it is very suitable for personalized heat transfer clothing customization.

TODOjet UV ink is formulated to produce vibrant colors using Cyan, Magenta, Yellow, Black, White, and Varnish.
Combined, this UV inkjet ink enables companies to achieve full-color graphics and images on a wide variety of flat and cylindrical objects.

TODOjet UV ink can be used in practically any UV printers.

Adheres to a wide variety of rigid substrates including glass, plastic, and metal

CMYK + W + V available

UV varnish is a special type of varnish that’s finished using an ultraviolet drying machine. It creates a more vivid, more luxurious and more tactile finish when compared to non-UV varnishes and adds an instant professional look to any printed project. Our UV 3050 Printers with 2 printheads support varnish printig, the uv 6090 Printers with 3 printheads could do this.Varnish is a coating that applies to your printed piece during or after printing. A varnish is added to a piece to enhance the look or to protect the piece from scuffing or scratching. Protect your print when handling or contact with moisture or chemicals.

Although UV printers can print patterns on the surface of hundreds or thousands of materials, due to the characteristics of the surface of different materials, the adhesion of UV ink, flexibility and other performance differences, it will lead to peeling, peeling, etc. on some materials. situation, which requires the use of UV coating to solve this problem.

The main purpose of the UV print head cleaning liquid is to clean the internal channels of the print head to keep it open and smooth the ink discharge.

A3 new digital offset printer, we develop and produce independently, do not use Epson L1800 and 1390 modification, our machine structure is reasonable and completely similar to industrial machine structure, using PP color management software color does not cast color.

With the TODOjet powder machine,you can set up different temperatures,the front heating, top heating and back heating. This will prevent the film from oil or moisture.

1. Source manufacturer, free proofing, lifetime maintenance
2. Personalized customization, unlimited fabrics, suitable for pasting in various shapes
3. Simple operation, Liyin Lidry, one-time molding

TODOjet 60cm size DTF film Printer with multi-functions,it can print on not only cotton,but also other clothing materials such as canvas, polyester, blends, nylon etc. We offer high quality machine and better after-sale service. We also offer wholesale price and OEM service.

When it comes to nozzles, the first thing everyone thinks of is the printer. The well-known printers are HP, Epson, Canon, Lenovo, Brother, Samsung and so on. These printers are now office type printers.

1. Use software draw the pictures , and then use the printer to print the pattern on the PET machine
2.Sprinkle an appropriate amount of hot melt poweron the printed PET film and shake off the excess hot melt power
3. Put the PET film on the heat transfer machine and back for 5-7 minutes ,until the hot melt powder melts , take out the PET film
4. Lay the T shirt flat on the heat transfer amchine and stick the sidesprinkled with hot melt powder on the T shirt for pattern

Adopt the main board of the leading enterprise in the domestic textile industry – Hansen main board: use variable point technology to make the printing pattern more delicate and the color more vivid. The components of the textile printing and dyeing printing system include: main control board, spray car board, nozzle driver board, PC processing software, PLC control module, etc.

During the curing process, the hot melt powder may produce some gas, here we need the air purifier for cleaning. TODOjet can offer you one-stop solutions of DTF printing, such as the DTF printer, powder shaker machine,PET film, hot melt powder,pigment ink and so on.

The powder shaker is rotated at a high speed and the heat transfer material is hit, so that the powder on the material will be shaken more evenly and the excess powder on the material will not be adsorbed on the invalid picture.

A3 DTF Printer, Our Latest A3DTF Printer is Officially Released. Direct to Film printing, or DTF, is a new technology that allows users to print designs onto special films. And then do heat transfer in any fabric，A very good way to do for every craft and DIY.

Hot melt powder is used in the printing of various textiles, leather, paper, wood and other materials and the preparation of various glues.

-Hot melt powder with softable and stretchy (white and black powder for option)
-Wider color gamut and densensity, bright color of pigment ink
-High quality white and fluresent ink （Fr,Fg,Fy,Fm）
-Good release,low shrinkage, high temperature re

High precision 100% EPS I3200-A1 water based print head for eco solvent printer and textile printing machine

use:
1. Heat transfer printing
2. Making printing glue
3. Screen printing

Advantage of UV led ink:
Environmental: no solvents penetrate, ink safety, no waste.
Durable, indoor 10 years, outdoor 3 years.
Robust image, cured graphic
Dry quickly, fast processing.
Direct to rigid uncoated substrates.
To any flat rigid substrates, even small arcuated surface. Can print on flexible substrate like canvas.
shelf life 6 month for white ink, other colors 1 year

Compatible with popular RIP software and designed for compact efficiency, the DTF-T652/653/654 represents the pinnacle of printing technology for businesses seeking enhanced capabilities. Upgrade your printing infrastructure today and embrace the future of printing excellence.

Using the shake powder could consider these procedures.
Dusting.
1.What is the powder sprinkled with?Hot melt powder, when the heat is sticky, after the formation of glue coating;
2.Why?Stick hot melt stick to the dry ink to help eventually form the coating;
3.How to sprinkle, sprinkle how fast?Can adjust the knob on the shake powder machine;
4.How much?The powder is about 2-3cm thick to stop sprinkling the powder.
Shaking.
1.Why shake powder?Shake off the excess powder on the ink and film adhesion, so that the powder is thin and evenly attached to the ink.
2.Shake powder speed.Depending on the situation, the knob on the condition machine, about 2-3 gear ok.
Drying.

1.Why drying?Melt the hot melt powder to create a reprint pattern coating;.
2.How long will it bake?Undefinite, depending on the specific situation, mainly to ensure that the pattern feels no powder, hot melt powder all melted into coating.
3.Temperature? 90-130 ° C is ok.

CAS No.:Hot Melt DTF ink powder
Other Names:TPU powder
Place of Origin:Henan, China
Classification:Hot Melt Adhesives
Main Raw Material:POLYURETHANE
Usage:Construction, Fiber & Garment, Footwear & Leather, Packing, Transportation, Woodworking
Brand Name:TODOjet
Model Number:Hot melt powder
Type:White, Black

Golden UV DTF Film: Advanced UV Printing Technology

Our Golden UV DTF film utilizes cutting-edge UV printing technology, allowing you to effortlessly print desired patterns using our UV DTF printer. These patterns can be easily transferred onto various surfaces, especially uneven hard surfaces such as glass, wood, resin, plastic, ceramics, and more, without the need for additional processing. The prints exhibit glossiness and a three-dimensional effect, offering a tactile and visually appealing finish. Ideal for small batch production.

The produced glue has the characteristics of water resistance, good fastness, fast drying speed, not easy to block the network, and does not affect the color of the ink, and is a new type of environmentally friendly material.