China manufacture Digital White Ink Transfer A1 PET Film Printer DTF Printer Machine For T-shirt

UV cold transfer film is an intermediate carrier, exists on the transfer paper or plastic base, carries the printed or printed pattern, and is used to transfer a layer of chemical elastic film on the printed article.

Print what you want to print, with full color to give you a more real experience, high-speed printing without manual after-sales worry-free, high-speed printing, mass production.

Depending on the area of the heating plate, the upper and lower plates have weight standards. If it is too light or too thin, the heating plate will be easily deformed and affect the use. Generally speaking, the heavier the weight, the more reliable the performance.

UV printing is one of the most flexible and exciting print processes ever created, and its uses are almost limitless. For regular object, UV Printing is so convenient. But for irregular object, there are some problems, the AB film solution  is  suitable  for these irregular object and you can also develop a new market of label printing industry. Its just expand the application of UV flatbed printer.

Printer Button Panel: Simplified Layout and Easy-to-understand Operation
Dusting motor: stepless speed regulation shakes powder cleanly
Smoke exhaust area: can be matched with a smoking machine, which is environmentally friendly and pollution-free

There are three main misunderstandings in the speed of UV flatbed printers: theoretical speed, speed in different modes, and actual production speed. What needs to be understood is that the speed in most sales man mouths only refers to the theoretical speed. A few professionals will mention the speed in different modes, but these are not the actual production speeds. The gap in the middle is at least Times to calculate.

When it is found that the pattern printed by the UV flatbed printer has left and right, and the upper and lower deviations are not aligned, it means that the x and y direction is misaligned, and the printing needs to be suspended immediately. Because the structural design and components of the x and y axis are different, the causes of fault and corresponding solutions are also different.

1. Simple control buttons
The key functions are clear and easy to operate, just one touch
2. Four-color printing
The colors are more vivid and rich, and the hot stamping effect is good

With 10 years experiences in printing filed, TODOjet can offer you the DTF printer with high qulity, professional package and good service. All our T-shirt printers need to through the strict quality testing.And TODOjet and offer you one stop solutions service,besides PET film printer, we can also offer you hot melt powder machine, heat press machine and also consumbles like pigment ink, hot melt powder,pet film and other parts that you need.

Advantage:
-Steady peel strength
-Anti static coating treatment
-Competible water based ink
-Bright color, non-stick powder
-Azo free, oeko-tex standard

Golden UV DTF Film: Advanced UV Printing Technology

Our Golden UV DTF film utilizes cutting-edge UV printing technology, allowing you to effortlessly print desired patterns using our UV DTF printer. These patterns can be easily transferred onto various surfaces, especially uneven hard surfaces such as glass, wood, resin, plastic, ceramics, and more, without the need for additional processing. The prints exhibit glossiness and a three-dimensional effect, offering a tactile and visually appealing finish. Ideal for small batch production.

Adjust the thermostat and timer of the heat press machine to the desired temperature and time.
1.Lay the substrate flat on the silicone plate, then place the offset heat transfer drawing on the substrate, and press the handle down firmly until it is completely closed.
2.When the time indicated for hot stamping is up, the buzzer will sound, and the handle will be lifted back to its original position.
3.If it is cold torn, the heat transfer paper should be torn off after cooling; if it is hot torn, the heat transfer paper should be torn off immediately after the hot stamping is completed.

Type: DTF Gradient Film Size: 60cm & 30cm*100m/roll Tear off Method: Cold Peel Warranty: 3 Years Note: Store in Dry & Damp-proof Environment

Many factors will affect the printing accuracy of the uv printer. For example, the pixel of the pattern, the higher the pixel, the clearer and better the printed pattern; The size of the nozzle of the nozzle;The smaller the nozzle, the smaller the ink droplets and the better;The software technology level of the manufacturer, the higher the level, the better the color printing effect.

The main purpose of the UV print head cleaning liquid is to clean the internal channels of the print head to keep it open and smooth the ink discharge.

Is it reliable to judge the performance of UV flatbed printers by weight? the answer is negative. This is actually a misunderstanding that most people use to judge quality by weight. Here are a few misunderstandings.

UV flatbed printers have pass trace, which is theoretically unavoidable, and mechanical errors cannot be eliminated to zero. But the higher the accuracy, the smaller the pass trace phenomenon and will not affect the printing quality. The cause of the pass trace of the pattern: the print feathering is too low, the two-way printing is too fast, the Y-axis belt is loose, the nozzle is in a bad state, and the ink is broken.

As professional DTF supplier,we can offer one stop service like hot melt powder shaking machine. This powder shaking machine is automatic dusting and curing the PET film while printing, can improve the production effciency. Meanwhile,we can offer together the hot melt powder and PET film.

We all know that the custom production of T-shirts is usually the heat transfer process. Heat transfer is to print the pattern on the heat transfer paper first, and then cover the printed product on the T-shirt after printing, and put it into the heat transfer machine ( Heat press machine) heat and pressurize for a few seconds, and the pattern is transferred to the T-shirt.

How to repair uv flatbed printer to save more money? Answer: No. This is obviously a joke. In fact, unless there is a major problem, there is no need to repair it in consideration of economic benefits ,then giving up. Of course, don’t expect that the equipment will not malfunction. This non-existent, once has a problem. What can be done is to solve it as soon as possible to avoid greater losses.

Product type: Roll to roll DTF PET film printer
Brand : TODOjet
Color : C/M/Y/K+W (4 pcs head support fluoresent ink printing)
Coating material : Hot melt powder
Printhead : 2pcs I3200 printhead,max 4 pcs
Priniting resolution : 2400dpi
Priting size : 600mm wide
Printing speed : 18㎡–25㎡/h
Feature : All in one
Suitable on material : Cotton,polyster,nylon,EVA,swimsuit,leather
Related machine:Powder shaking and curing Machine

Main products of TODOjet
DTF Printer and DTF Powder Oven (A3,60cm,120cm size) Widely used to customize the T-shirt, hoodie, scokes, shoes, bags, etc.

UV Flatbed Printer (3050,6040,UV6090,UV1350) Widely used in textile, plastic sheet, metal plate, acrylic sheet, wood board, leather, glass, phone case, ceramic tile, etc.

All kind of consumables for DTF solution DTF powder, DTF ink, DTF film, UV ink, UV AB film, etc

Daily maintenance is essential for keeping your UV DTF printer in top condition and ensuring high-quality prints for custom transfers, personalized merchandise, and other print applications. Proper maintenance helps avoid costly repairs, extends the lifespan of your UV DTF printing machine, and minimizes downtime. Here are some key daily maintenance steps you should incorporate into your routine for optimal print quality and machine performance.

1. Printed pictures have horizontal lines
2. Large color deviation
3. The edge of the picture is blurred and ink is flying
4. Printed pictures are scattered with small ink dots
5. There is ghosting in the horizontal printing
6. Printing dripping or broken ink

Crystal label, its feature is that it can be made in small batches or even one piece, and the film can be peeled off to leave pictures and texts. In addition to good pattern effects, it also has good scratch resistance and weather resistance, which is somewhat similar to the advantages of UV printers.

1.High colour density, wide colour gamut, outstanding colour saturation.

2.suitable with a variety of materials.

3. Excellent performance

4. Great wash fastness

5.Non-toxic and environmentally friendly

UV flatbed printer print head heating does not heat up, it will directly affect the normal ink out of UV ink, leading to ink cut-off during printing. Especially when the temperature in winter is low, the fluency of UV ink is far less than that in summer. At this time, not only the equipment nozzles and UV ink need to be heated, but the external working environment also needs a suitable temperature. The suitable ambient temperature for UV flatbed printers is between 15° C and 25° C, and the humidity is between 40% and 70%. There are 6 kinds of reasons that the nozzle does not heat up, and it is easy to solve.

De øvre og nedre platene skal være laget av aluminium, og varmerøret skal støpes inne i aluminiumsplaten. For eksempel, hvis den øvre platen er slisset på en aluminiumsplate, og deretter festet til den med et varmerør, vil det forårsake unødvendig energitap, og det vil ha ulemper som langsom oppvarming og stor temperaturforskjell i konstant temperatur under bruk .

K-PRINT is one of the largest and most influential international exhibitions in Korea, with an exhibition scale of 25,000 square meters and more than 400 exhibitors. It is an exhibition with great development prospects selected by the Ministry of Industry, Trade and Resources of Korea. , is also a printing feast created by the official comprehensively integrating multiple resources.

Accuracy: Variable Droplet High Quality Printing
Variable Droplets for Beautifully Smooth Gradients: Features a variable droplet feature that prints ink into 3 different sizes of droplets at once