Custom flocking DTF film convex and concave silicone DTF direct transfer to the film hot stamping 3D effect

1,Rail maintenance
2,Platform maintenance
3,Damper replacement
4,capping Replacement

With the development of the 5G era, most people choose online shopping, and the emergence of various explosive clothing. In this era of the rise of e-commerce, the choice requirements of young people are gradually increasing, and there are more and more choices of clothing patterns. Young people like personalized customization.

At present, the most widely used laser films on the market mainly include laser aluminized films and laser bronzing films.

RGB color model refers to the three primary colors of light: Red, Green, and Blue,the three primary color light with different proportions of the sum, can produce a variety of color light, in theory, red, green, blue light can be mixed out of all colors.

Crystal label, its feature is that it can be made in small batches or even one piece, and the film can be peeled off to leave pictures and texts. In addition to good pattern effects, it also has good scratch resistance and weather resistance, which is somewhat similar to the advantages of UV printers.

Is it reliable to judge the performance of UV flatbed printers by weight? the answer is negative. This is actually a misunderstanding that most people use to judge quality by weight. Here are a few misunderstandings.

De øvre og nedre platene skal være laget av aluminium, og varmerøret skal støpes inne i aluminiumsplaten. For eksempel, hvis den øvre platen er slisset på en aluminiumsplate, og deretter festet til den med et varmerør, vil det forårsake unødvendig energitap, og det vil ha ulemper som langsom oppvarming og stor temperaturforskjell i konstant temperatur under bruk .

1. Roll-to-roll printer products represent the wave of inkjet printing in the 21st century.

2. New ink spray printing method – the computer directly outputs inkjet to create higher printing.

3. The roll-to-roll printer is a “non-contact with the object” inkjet printing type — digital printing equipment

Compatible with popular RIP software and designed for compact efficiency, the DTF-T652/653/654 represents the pinnacle of printing technology for businesses seeking enhanced capabilities. Upgrade your printing infrastructure today and embrace the future of printing excellence.

When using a UV DTF printer for custom transfers or personalized merchandise, the final print quality can be influenced by several key factors. Understanding these elements can help you achieve superior printing results, whether you’re printing on garments, promotional items, or other substrates. Below are the top factors to consider for optimizing the print quality of your UV DTF printing machine:

Although UV printer can print patterns on the surface of hundreds of materials or thousands of materials, due to the differences in the characteristics of the surface of different materials, the adhesion of UV ink, and flexibility, some materials will peel off and peel off Situation, this requires UV coating primer to solve this problem.

1. The compatibility between the main board of the printer and the print head/software is more stable
⒉ Board waveform corresponds to more precise color management and lower deviation
3. The printing of the white color nozzle is not offset, and the accuracy is higher
4. The life of the print head is more durable, and it is not easy to break the ink and pull the wire
5. The official after-sales service group can track and reply at any time

No limit of fabric materials
No need pre-coating
CMYK+ White (Fluoresent color for option)
2pcs EPSON i3200-A1 (4 heads for option)
Printing width: 60cm
Printing Speed: 10~15sqm/h
Software: Maintop/Photoprint

Despite some limitations regarding adhesion to certain surfaces, crystal labels remain one of the best options for advertising customization due to their versatility, cost-effectiveness, and high-quality finish. For businesses looking to elevate their brand identity with personalized labels that make a lasting impression, AGP crystal labels offer the perfect solution. With strong adhesion, three-dimensional visual appeal, and a premium finish, crystal labels are setting the standard for innovative branding and advertising customization.

High precision 100% EPS I3200-A1 water based print head for eco solvent printer and textile printing machine

The visual effects of UV printing have three-dimensional effects such as flat ordinary color printing, 3d, 4d, and 5d. Among them, ordinary color printing is also divided into two-color, four-color, six-color, eight-color, eleven-color and so on. The more spot color UV inks are used, the more delicate the pattern display.

1. Can print cotton T-shirts, sweaters, denim, canvas bags, etc.
2. Double nozzles or four nozzles, with white color output
3. Low-concentration white ink + circulating filter system, no blockage of nozzles
4. The daily output can reach up to 4000 pieces

The main purpose of the UV print head cleaning liquid is to clean the internal channels of the print head to keep it open and smooth the ink discharge.

Top cover,6 heat tubes
Master switch,Sealant strip surround
A3 film tray,Cold fan
TEMP setup and timing settings

A3 size DTF powder shaking machine
new solution for universal print
free teaching and life-long after sale service

Symptoms of poor ink output from uv flatbed printers are: flying ink, dripping ink, drawing and so on. There are roughly eight kinds of reasons that cause this kind of failure. In actual application, the UV flatbed printer design varies from different manufacturers. Some may have 10 reasons, and some may have 6 reasons. But mastering the following 7 kinds can solve the problem that 99% of the nozzles have poor ink discharge.

Easy to use, tear and paste, UV printing, good color reproduction, meet the needs of the project, environmental protection, waterproof and wear-resistant, high-temperature resistance,colorful, Golden glossy surface and good 3D texture, simple operation, easy to paste, can paste any material (except fabric).

Did you choose the right one? Guide to DTF Transfer Hot Melt Powders

Hot melt powder is the key material in the DTF transfer process. You may be wondering what role it plays in the process. Let’s find out!

Hot melt powder is a white powdery adhesive. It comes in three different grades: coarse powder (80 mesh), medium powder (160 mesh), and fine powder (200 mesh, 250 mesh). Coarse powder is mainly used for flocking transfer, and fine powder is mainly used for DTF transfer. Because it has such great adhesive properties, hot melt powder is often used as a high-quality hot melt adhesive in other industries. It’s very elastic at room temperature, turns into a viscous and fluid state when heated and melted, and solidifies quickly.

Type: DTF Gradient Film Size: 60cm & 30cm*100m/roll Tear off Method: Cold Peel Warranty: 3 Years Note: Store in Dry & Damp-proof Environment

UV Curable Varnish UV Primer Liquid For UV Flatbed Printer machine varnish coating for phone case acrylic glass wood

Printer Button Panel: Simplified Layout and Easy-to-understand Operation
Dusting motor: stepless speed regulation shakes powder cleanly
Smoke exhaust area: can be matched with a smoking machine, which is environmentally friendly and pollution-free

When it comes to nozzles, the first thing everyone thinks of is the printer. The well-known printers are HP, Epson, Canon, Lenovo, Brother, Samsung and so on. These printers are now office type printers.

Q: What are the printhead of UV printers?

A: The printhead of UV printers mainly include the following types: Ricoh, Epson, Kyocera, Toshiba, Seiko, Konica, and the most used ones are Epson fifth-generation printhead, Epson 4720 printhead, Epson tenth-generation printhead and Ricoh G5 printhead, Epson It is a non-industrial sprinkler, the others are industrial printhead.

White Ink Heat Transfer Scheme>>
Bai Caitong comes out with an environmentally friendly paint scheme, which is a subversive heat transfer process.
It solves the problem that the direct-injection printing process is picky about fabrics, and the new heat transfer is not limited to material transfer.

Heat transfer medium：T-shirt, sweater, down jacket, canvas bag, jeans, polyester, cotton, cotton, silk, couples wear, parent-child wear, spandex non-woven fabric, cotton cloth, ready-to-wear, chiffon, scarf, vest, underwear, cashmere sweater, book edge, pillowcase, etc.