DTF PET Film for Our A3 DTF Printer with CMYK+ Fluorescent Color+ White

If the ink dots or lines per foot are used as the key factor for the print quality of UV printers, it seems a bit oversimplified. Other important factors have not been taken into account. Some factors are related to UV printer systems, and some are related to UV ink quality , Not specific to the print head.

In scientific terms, Sublimation is the transition of a substance directly from a solid state to a gas state. It does not pass through the usual liquid state, and only occurs at specific temperatures and pressures. Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy (heat) between physical systems. Mention Heat transfer, we need to mention the DTF printer specially. DTF Printer’s market is promising. Today we’ll tell you something about sublimation and heat transfer.

Product type: Roll to roll DTF PET film printer
Brand : TODOjet
Color : C/M/Y/K+W (4 pcs head support fluoresent ink printing)
Coating material : Hot melt powder
Printhead : 2pcs I3200 printhead,max 4 pcs
Priniting resolution : 2400dpi
Priting size : 600mm wide
Printing speed : 18㎡–25㎡/h
Feature : All in one
Suitable on material : Cotton,polyster,nylon,EVA,swimsuit,leather
Related machine:Powder shaking and curing Machine

Applicable medium: nylon, chemical fiber, cotton, leather, swimsuit, wetsuit, PVC, EVA, etc.
Powder control: powder shaking control, dusting control, direction, amount control
Rewinding function: automatic induction rewinding

1. Printed pictures have horizontal lines
2. Large color deviation
3. The edge of the picture is blurred and ink is flying
4. Printed pictures are scattered with small ink dots
5. There is ghosting in the horizontal printing
6. Printing dripping or broken ink

Is it reliable to judge the performance of UV flatbed printers by weight? the answer is negative. This is actually a misunderstanding that most people use to judge quality by weight. Here are a few misunderstandings.

Simple and easy operation
1. Select a picture
2. Click Print
3. Heat press machine
4. Finish the finished product

Top cover,6 heat tubes
Master switch,Sealant strip surround
A3 film tray,Cold fan
TEMP setup and timing settings

De øvre og nedre platene skal være laget av aluminium, og varmerøret skal støpes inne i aluminiumsplaten. For eksempel, hvis den øvre platen er slisset på en aluminiumsplate, og deretter festet til den med et varmerør, vil det forårsake unødvendig energitap, og det vil ha ulemper som langsom oppvarming og stor temperaturforskjell i konstant temperatur under bruk .

1.High colour density, wide colour gamut, outstanding colour saturation.

2.suitable with a variety of materials.

3. Excellent performance

4. Great wash fastness

5.Non-toxic and environmentally friendly

Industrial UV printers take digital images and print them directly onto a substrate. These machines utilize cyan, magenta, yellow, black, white and varnish UV inks to reproduce stunning graphics on a variety of materials such as plastic, glass, stainless steel, ceramic and more. Most of UV printer manufacturers recommend that buyers buy the specified ink from them, why is this?

White ink timing stirring function, every 30 minutes, the machine will automatically stir the white ink to prevent precipitation (automatic, no manual operation required)

A3 size DTF powder shaking machine
new solution for universal print
free teaching and life-long after sale service

You need more than a DTF printer, you need an experienced supplier with satisfactory after-sales service in the field to build your brand and grow your profits. Let Todojet help you achieve business success.Latest technology of A3 DTF Printer ,Todojet DTF Printer is equipped with PET film

The UV-curable ink is cured and adhered to the media or substrate by UV radiation. The print is already dried when it comes out of the printer, allowing a short delivery request to be met. Printing on non-absorbent materials, including plastic, glass, and metal, is available. To give shape to ideas, TODOjet offers a range of UV-curable ink products to meet demands from various industries

TODOjet UV Film has good adhesion, good smoothness and high brightness. Insoluble colorful powder, luminous powder, strong yellowing resistance, good folding resistance and adhesion, excellent printing adaptability, good leveling and defoaming.

DTF Printers are an alternative process to DTG printers for T-shirt printing or other garment printing,this direct to film printer use water-based pigment ink to print a film transfer. Once the ink is dry, powdered glue is applied to the back. Now it is heat cured ready for storage or instant use(here need a powder curing machine). It makes no difference on cotton, silk, polyester, synthetic fabrics, genuine leather, or synthetic leather – the DTF printing process can be applied to all of them.

Advantage of uv led ink:
Environmental: No Solvents Penetrate, Ink Safety, No Waste.
Durable, Indoor 10 Years, Outdoor 3 Years.
Robust Image, Cured Graphic
Dry Quickly, Fast Processing.
Direct To rRgid Uncoated Substrates.
To Any Flat Rigid Substrates, Even Small Arcuated Surface. Can Print on Flexible Substrate Like Canvas.
Shelf Life 6 Month For White Ink, Other Colors 1 Year

UV flatbed printers have pass trace, which is theoretically unavoidable, and mechanical errors cannot be eliminated to zero. But the higher the accuracy, the smaller the pass trace phenomenon and will not affect the printing quality. The cause of the pass trace of the pattern: the print feathering is too low, the two-way printing is too fast, the Y-axis belt is loose, the nozzle is in a bad state, and the ink is broken.

Definition of Flocking Heat Transfer

Flocking heat transfer is a process that uses high-quality flock paper to create patterns with a plush, three-dimensional appearance. The flock feels soft and ranges in height from 0.6 to 1.2mm. This technique includes multi-color flocking and glitter flocking, which are at the forefront of the industry. Flocking heat transfer is widely used in various applications, such as women’s clothing, sportswear, children’s clothing, plush toys, and sweaters.

The produced glue has the characteristics of water resistance, good fastness, fast drying speed, not easy to block the network, and does not affect the color of the ink, and is a new type of environmentally friendly material.

You can print on AGP paper Glitter Gold DTF Film directly with your existing DTF printer and DTF ink, without changing any consumable or DTF printer setting. This Glitter Gold DTF Film works on T-shirts, bags, shoes, socks and other materials, provides you intense sparkle and shine to your prints. The new product has the advantages of glitter Gold effect, high ink absorption, no ink-bleeding, easy peel, and washable.

Q: What are the printhead of UV printers?

A: The printhead of UV printers mainly include the following types: Ricoh, Epson, Kyocera, Toshiba, Seiko, Konica, and the most used ones are Epson fifth-generation printhead, Epson 4720 printhead, Epson tenth-generation printhead and Ricoh G5 printhead, Epson It is a non-industrial sprinkler, the others are industrial printhead.

As professional UV printer and DTF printer manufacturer, we not only offer the printers, but also provide the related consumables and spare parts like original and new F1080 xp600 print head DX6 DX10 DX11 4720 i3200 printhead for UV printer and DTF printer machine.

1. The compatibility between the main board of the printer and the print head/software is more stable
⒉ Board waveform corresponds to more precise color management and lower deviation
3. The printing of the white color nozzle is not offset, and the accuracy is higher
4. The life of the print head is more durable, and it is not easy to break the ink and pull the wire
5. The official after-sales service group can track and reply at any time

There are three main reasons for the failure of the UV flat printer main circuit: the relay is damaged, the electrical contact is poor, and the ground line and zero line are reversed. When encountering such a situation, the power must be cut off for the first time, and subsequent maintenance work must also be performed in a power off state.

According to the shape and function of the ironing board: flat pressing machine (mainly used for the collection of sizes and specifications of clothing and apparel fabrics).

About maintenance of Epson printheads, you mayhave many questions,here we can offer someuseful tips for your reference.

3D stereoscopic
3D stereoscopic suede visual effect, soft and comfortable to the touch, no fading, no odor, strong three-dimensional sense.
Thick plate silicone
The feel is concave and convex, the texture is strong, giving people a relatively novel high/end feeling. Strong, washable and wear-resistant
Customizable
There are 3 conventional colors, and other colors can be customized by samples or color numbers.

UV Curable Varnish UV Primer Liquid For UV Flatbed Printer machine varnish coating for phone case acrylic glass wood