DTF Printer with Dryer: Pigment Ink Direct-to-Film Printing Machine for Offset Heat Transfer Inkjet Printing

As Christmas approaches, most users’ UV flatbed printers will face a non-use state for more than 7 days. Coupled with the influence of the cold weather in winter, the maintenance of the equipment will be more thorough and comprehensive than usual. This article mainly discusses how to maintain the nozzle, core components, and external environment.

The heat transfer film printer is not limited by the pattern, no matter how complicated the pattern is, it can be printed out, and the new TODOjet A3 DTF heat transfer printer provides 8-color, 7-color, 4-color ink configurations according to individual uses and purposes. Contains value-enhancing white inks and metallic silver inks that feature high-precision color reproduction.

To understand the market prospects of UV printers, we can start from the three aspects of UV printer equipment itself, the materials that can be printed, and the applied industry.

The color problems of UV flatbed printer pattern printing are as follows: the picture is color cast, the color different is serious, the color is not clear. There are 6 reasons: different inks, different ink dots, external temperature, ink deposition, software fault, and adjusting color problems.

Advantage:
-Steady peel strength
-Anti static coating treatment
-Competible water based ink
-Bright color, non-stick powder
-Azo free, oeko-tex standard

1. Machine stand
2. Front/rear two-stage heating
3. Plug-in Dalian supply
4. White Ink Stirrer
5. Nozzle area
6. Body

When it is found that the pattern printed by the UV flatbed printer has left and right, and the upper and lower deviations are not aligned, it means that the x and y direction is misaligned, and the printing needs to be suspended immediately. Because the structural design and components of the x and y axis are different, the causes of fault and corresponding solutions are also different.

Type: DTF Gradient Film Size: 60cm & 30cm*100m/roll Tear off Method: Cold Peel Warranty: 3 Years Note: Store in Dry & Damp-proof Environment

Heat transfer medium：T-shirt, sweater, down jacket, canvas bag, jeans, polyester, cotton, cotton, silk, couples wear, parent-child wear, spandex non-woven fabric, cotton cloth, ready-to-wear, chiffon, scarf, vest, underwear, cashmere sweater, book edge, pillowcase, etc.

Product type: Roll to roll DTF PET film printer
Brand : TODOjet
Color : C/M/Y/K+W (4 pcs head support fluoresent ink printing)
Coating material : Hot melt powder
Printhead : 2pcs I3200 printhead,max 4 pcs
Priniting resolution : 2400dpi
Priting size : 600mm wide
Printing speed : 18㎡–25㎡/h
Feature : All in one
Suitable on material : Cotton,polyster,nylon,EVA,swimsuit,leather
Related machine:Powder shaking and curing Machine

Print what you want to print, with full color to give you a more real experience, high-speed printing without manual after-sales worry-free, high-speed printing, mass production.

Flocking Printing
Flocking printing is a common method in the clothing printing industry known for its strong three-dimensional effect, fluffy feel, and comfortable texture, which distinguish it from other printing and hot stamping methods. The thickness is typically 0.7 mm.

Powder machine usually come with DTF printer, for printed film powder coating and curing.Then the film can be transferred on any kind of fabric materials.

TODOjet DTF printer can offer related consumbles like hot melt powder machine,relased PET film and hot melt powder. Transfer PET film with 30cm*100m and 60cm*100m size. Hot melt powder with good adhesive effect,we have white melt powder and black melt powder for option. As to inks, we can offer high quality white pigment ink, cyan pigment ink, magenta pigment ink, yellow pigment ink, and also fluorecent color ink like fluorecent orange and fluorecent green.
As professional DTF printer manufacturer, we not only offer the machines, also offer you full solutions.

1,Rail maintenance
2,Platform maintenance
3,Damper replacement
4,capping Replacement

A3 size DTF powder shaking machine
new solution for universal print
free teaching and life-long after sale service

About maintenance of Epson printheads, you mayhave many questions,here we can offer someuseful tips for your reference.

TODOjet DTF printer can offer related consumbles like hot melt powder machine, relased PET film and hot melt powder. We have both 30cm*100m and 60cm*100m roll PET film for option, which used for cold peel transfer. You can printing direct to this film with our DTF printer. And this film is the correct micron thickness for powder shaking machine (automated curing machines).

The transfer paper can output the pattern to be hot stamped with an inkjet printer, and then print it on the clothes.

Is it reliable to judge the performance of UV flatbed printers by weight? the answer is negative. This is actually a misunderstanding that most people use to judge quality by weight. Here are a few misunderstandings.

Regarding to Epson printhead UV printer, most supplier suppliers use positive pressure for ink supply, this required that the ink level should keep higher about 20cm than the head nozzles(like 6090UV model),so that can make sure the ink output fluency.

1.White ink with color ink: soft to the touch
2.No waste, just tear it off
3.Hollow pattern, no need to engrave, fine lines, small characters and fine dots can be printed naturally

In the process of printing patterns on UV flatbed printers, printing errors sometimes occur. This kind of problem is generally caused by poor contact of the decoder, damage to the decoder, misalignment of the grating strip, overrun of the image array, and wrong printing direction, software damage,ect.

UV cold transfer film is an intermediate carrier, exists on the transfer paper or plastic base, carries the printed or printed pattern, and is used to transfer a layer of chemical elastic film on the printed article.

High quality DTF shaker powder shaking dryer, usually together for XP600/4720/i3200 DTF printer or other DTF printing machine. Mainly used for hot melt dusting and curing during printing. We have different powder shaking machine can meet your different printing speed like 2 head printer powder shaker and 4 heads printer powder shaker.

De øvre og nedre platene skal være laget av aluminium, og varmerøret skal støpes inne i aluminiumsplaten. For eksempel, hvis den øvre platen er slisset på en aluminiumsplate, og deretter festet til den med et varmerør, vil det forårsake unødvendig energitap, og det vil ha ulemper som langsom oppvarming og stor temperaturforskjell i konstant temperatur under bruk .

High quality
The product has high-quality features such as high elasticity, anti-stretching, anti-sublimation, anti-slip, non-fading, non-cracking, non-falling, washable, wear-resistant and high-temperature resistant, easy to iron, easy to carve and tear, etc.
More efficient
AGP transfer film requires no secondary treatment on the surface and can be printed directly.

Compatible with popular RIP software and designed for compact efficiency, the DTF-T652/653/654 represents the pinnacle of printing technology for businesses seeking enhanced capabilities. Upgrade your printing infrastructure today and embrace the future of printing excellence.

1. Simple control buttons
The key functions are clear and easy to operate, just one touch
2. Four-color printing
The colors are more vivid and rich, and the hot stamping effect is good

Recently, many people have asked what is the difference between white ink heat transfer and heat transfer? In short, both of them are suitable for clothing and textiles, but they are very different in terms of color fastness and craftsmanship. Today, we use these two common machines in the market to make a technical comparison. Let’s take a look at it. Where is the difference between the two.