DTG printer or DTF printer,which one is better?

Dtf printer is called direct to film printer which is a unique printing technology that involves printing designs onto special PET films for transfer onto to a variety of garments (and other substrates).
DTF printing machine is a heat transfer process that has the ability to last as long as traditional silkscreen prints.

Want one set machines to print on different items such as garment of different material, hoodies, shoes, bags,etc?
Can check this DTF solution.
Compared with the DTG direct to garment printer, this DTF solution is flexible in positioning, and avoid the waste of t-shirt due to any unexpected fault,no need pre-treating, and good for mass production.

This machine specializes in producing non-cutting heating transfer PET. This technology is suitable for printing on light and dark color cotton fabric, PU, leather and other materials. This technology is particularly advantageous for small orders.

1. keep the machine clean:keep the important parts of the machine clean, can not be stained with oil and dust, keep the hot transfer film clean, can not be stained with fingerprints and dust, keep the bearing products clean, no dust, oil, keep the hands clean, no oil, no sweat.
2.hot stamping pressure:hot stamping pressure must be adjusted to the most appropriate, otherwise too big and easy to hurt the glue head and be hot material, too small and affect the hot stamping effect.The pressure shall be locked after adjusting to the best stamping pressure to avoid change in mass production.
3. hot temperatureIt is easy to damage the bearing material, too low hot temperature may not be able to reach the normal transfer printing.Hot temperature should be determined by the bearing material, flower film, heat transfer machine, these factors, different materials have different hot temperature.
4.hot stamping speed:hot stamping time (speed) should be determined according to the specific hot stamping, in the case of ensuring the hot stamping effect, the faster the speed, the higher the production efficiency, but some products due to some special conditions must use slow speed

The appearance is simple, stable, the body-integrated design, the metal frame structure is adopted, the cold-rolled steel plate electrostatic spraying process is equipped with a switch, and the air volume and suction adjustment knobs are installed. The air volume and suction can be adjusted. The product is small in size and easy to move.

-The Best T-shirt Printer
-You do not need to pre-process the clothing.
-After printing on the PET film with a DTF printer, it can be directly transferred to the T-shirt by a heat press, which is faster and has better results than a DTG printer.
-It’s Very popular now.
-Based on the xp600 print head

It can heat various heat transfers on cotton, linen, chemical fiber and other fabrics through thermal transfer, and can also be processed for heat treatment such as screen printing, glue, foaming, etc.

Q: What does after-sales service include?
A: The company provides technical support for a long time, and provides “lifelong technical and training services” for each customer to help customers solve various problems encountered in the production process in real time, and feedback the technicians to propose solutions at the first time. Try to ensure that your production work is not delayed.

Since 2009, we have been focusing on digital printing solutions, and are proficient in various printing solutions such as film output, sublimation transfer printing, digital direct injection printing, digital drawing printing, treadmill, belt guide, white ink heat transfer digital printing, etc. We have been making progress and innovation, helping customers to update their printing processes, developing and producing more advanced and stable equipment.

Consumable items:
-Hot melt powder with softable and stretchy (white and black powder for option)
-Wider color gamut and densensity, bright color of pigment ink
-High quality white and fluresent ink （Fr,Fg,Fy,Fm）
-Good release,low shrinkage, high temperature re

Type: Inkjet Printer Product name: A3 Dtf Printer
Print head: I3200/4720/XP600 Media Type: PET Film (Premium Quality)
RIP software: Photo Print Core Components: Motor, PLC, Gear

Popular A3 size DTF printer in 2022, with double Epson print head XP600, supporting maximum 6 colors CMYK+W+Fluorescent green and orange. Our DTF printer can print on any fabrics directly such as cotton, nylon, polyester, silk, denim, canvas, blends and so on, which is suitable for different business demands.

T-shirt Printing Machine is very popular with garment business.Because the pattern of T-shirt Printing Machine is vivid,colorful and increase much fun for the T-shirt.With 12 years experiences in printing industry, TODOjet can offer you the DTF printer with high quality,affordable price, better after-sale and professional technology support.

We will solve your “trouble”:

Printing method: digital heat transfer,
No plate making, simple process, short timeliness, low cost, low operation difficulty and high cost performance.

New technology of DTF printer can print on transfer pet film,the finished film can be pressed on cotton, linen, chemical fiber and other fabrics by heat transfer.It is replacing traditional embroidery and screen printing, but the cost is much lower and and effect is much better than ordinary embroidery and multi-color screen printing.

TODOjet is the best DTF printer PET film printer supplier in China,which can offer you full series DTF printer, from A3 size to large format size DTF printer, we can also offer you i3200 printheads printer, 4720 printhead DTF printer,and also XP600 printhead printer. Besides this, we can also offer you other consumbles such as hot melt powder, PET transfer film,poweder machine and heat press machine.

Factory delivery: provide technical guidance ink/powder/heat transfer film offset heat transfer printer one-stop supply,Use the special paint ink for transfer film to print the pattern on the PET film, directly remove dust, no need to cut, no need to discharge waste, and the fast transfer of natural hollowing is suitable for any fabric.

The white color set is accurate, and the 1mm small characters are high-definition without strokes;
No stroke, hollow out, no need to open the plate, one piece of printing;
Suitable for any fabric, do it together with light and dark fabrics, print what you want;
Small footprint, one person operation, high temperature and water resistance!

A point to note:The hand transferred to the clothes will be slightly larger than some films, but it is basically negligible.

DTF is to print color ink on the transfer film, and then print white ink on the color ink. After the white ink is sprinkled with glue powder, it is pressed to the clothes. The ink is actually printed on the coating of the film, the coating will not absorb any ink, and it can ensure that the ink does not spread, which is used to ensure the vivid color.

Drying system: simple and fast operation, cold air mesh belt tunnel drying system platform drying, instant drying, effective protection of material color.

Todojet is a diversified production enterprise, producing thermal transfer printing, thermal transfer printing, transfer film, transfer materials; packaging product printing and other printing products.

Heat transfer printing: For the embodiment of details, it is required that the white color of the printer be accurately aligned. Under normal printing speed of 6pas bidirectional printing, the printing accuracy should be high. We can print and heat transfer down to 0.3 mm at a speed of 24 meters per hour. of thin lines.

Features of TODOjet Digital Offset White Ink Heat Transfer Printer Solution:
1. The main board of the printer is mainly composed of domestic Hansen boards, and Leisai servo motors combined with Epson XP600 high-definition print heads, and the performance is more stable.
2. The secondary ink supply system is adopted to ensure continuous ink printing for a long time to ensure the output quality of the picture. The Japanese THK silent linear guide rail is adopted to make the movement more stable and the service life longer.
3. The American fluororubber platen roller prevents static electricity and does not fly ink, and the printing size is finer. The two-way Laisai brushless motor, high-precision driving linear decoding, has higher precision, smaller length error, and more stable performance; the operating platform is simple, The combination of white ink automatic stirring and circulation system + ink circuit circulation system makes the ink use more smoothly, does not block the nozzle, improves the production efficiency, reduces the ink loss rate, and increases the durability of the nozzle.
4. The paper reel of the damping retracting system is convenient and quick, the quick storage of printing media is smoother, the comprehensive performance is stable, and it is more suitable for long-term work. Five-color ink and white color are produced at the same time, and the intelligent production and processing of powder, shaking powder and drying are integrated to improve production efficiency. The durable life of the machine will be longer, and it is suitable for long-term production without interruption, without delay, and as a sharp tool for stable production and processing.

Heat press machine operation process: adjust the thermostat to the required temperature, after the temperature reaches the set temperature, the indicator on the upper part of the thermostat goes out, and you can start working at this time.

To truly understand DTF printing, you need to start by knowing what DTF stands for. DTF is the abbreviation for “direct to film.” In order to do a DTF craft, you’ll need an image printed by a DTF printer. DTF prints require heat in order to transfer properly—whether you’re transferring to a canvas bag or a versatile wooden blank. Now that you understand the basics of DTF, here are the reasons why you choose A1 DTF Printer.

AGP S30 A3 UV DTF Printer Wholesale Price Hot Sale Epson l1600 Sticker Transfer Printing is a powerful direc to film printer. Boosts a ultravilot LED curing system, it will print fabulous sticker transfers for you.

DTF printer is a popular technology in fabric industry. A wide range of applicable materials, such as cotton fabrics, high-elastic fabrics, nylon fabrics, chemical fiber fabrics, swimwear, denim, PVC, EVA etc. It is easy to operate and maintain, suitable to start new business.

DTF printer white ink heat transfer printer, film printing film or printing film, ink printing ink can also be called printing ink! DTF is suitable for many different garment materials: such as cotton, polyester, nylon, treated leather, polyester fabrics, 50/50 blends, and light and dark fabrics.

Determining the appropriate DPI for a print transfer can be a complex task. However, by following the guidelines outlined in the DTF Printer 101 manual, you will be able to select the optimal DPI for your specific requirements.

In this article, we will analyze key aspects and examine the details of achieving optimal print transfers. We understand that technical term abbreviations can be confusing, so we will explain them when first used. In short, we will help you determine the appropriate DPI (dots per inch) for your DTF printer. Understanding the relationship between DPI and print resolution is crucial to achieving clear and crisp prints that meet your requirements. Follow along with us as we explore the secrets of DPI and provide valuable insights to help you choose the best resolution for your DTF print delivery.