Factory High-Quality CMYKW UV LED A3 UV DTF Printer for Glass, Wood, Metal, PVC, Acrylic, and Phone Case Inkjet Printing

A3 DTF Printer, Our Latest A3DTF Printer is Officially Released. Direct to Film printing, or DTF, is a new technology that allows users to print designs onto special films. And then do heat transfer in any fabric，A very good way to do for every craft and DIY.

UV flatbed printers have pass trace, which is theoretically unavoidable, and mechanical errors cannot be eliminated to zero. But the higher the accuracy, the smaller the pass trace phenomenon and will not affect the printing quality. The cause of the pass trace of the pattern: the print feathering is too low, the two-way printing is too fast, the Y-axis belt is loose, the nozzle is in a bad state, and the ink is broken.

The digital direct injection process of pure cotton paint, which has been developed for many years, is the most variable in digital printing at present, but its color, fastness and hand feel have been improved to varying degrees. Among them, the most innovative improvement is the combination of The silk screen paste process and the white ink direct injection process, these two process schemes have greatly increased the market share of the coating direct injection process.

I often hear two kinds of sounds. One is from the UV flatbed printer manufacturer. “Using the manufacturer’s UV ink, the life, smoothness of the print head, and post-printing color follow-up provide warranty. Without the manufacturer’s UV ink, the print head and ink path appear. System failure is not covered by the warranty. ” The other one is from the customer side “Can I not use your UV ink? The price is more expensive, so if there is a problem in the later stage, please pay your to solve it.”

The color problems of UV flatbed printer pattern printing are as follows: the picture is color cast, the color different is serious, the color is not clear. There are 6 reasons: different inks, different ink dots, external temperature, ink deposition, software fault, and adjusting color problems.

DTF textile printing ink is highly compatible with Epson xp600 print head. You can directly print your designs on different textiles and fabrics using Direct to Film Ink technology.There is front and rear heating, auto ink supply, white ink circulating and stirring.

Top cover,6 heat tubes
Master switch,Sealant strip surround
A3 film tray,Cold fan
TEMP setup and timing settings

Before, if customers want to print on bottle mugs, they need to buy rotary clamp together with uv flatbed printer; Now, no need, UV DTF AB film helps transferring on bottles mugs, even irregular objects, without rotary clamp. Because of this feature, once UV DTF AB film lacunhed, they became hot sale.

With the development of the 5G era, most people choose online shopping, and the emergence of various explosive clothing. In this era of the rise of e-commerce, the choice requirements of young people are gradually increasing, and there are more and more choices of clothing patterns. Young people like personalized customization.

UV DTF AB Film for digital uv dtf printer is hot, there are different types in the market. Some film A needs to print on transparent film, then laminating film B with heating; some film A needs to white paper film, then laminating film B with heating. Our this new upgraded AB film is printing on whtie paper side, then laminating film B with only pressure, no need heating.

UV AB Film material is waterproof and high temperature resistant, wear-resistant and scratch-resistant for daily use, bright color and clear details
UV Ink is low-odor, non-toxic, safe and secure, smooth printing without blocking the nozzle, rich

Platform upgrade: precision CNC aluminum alloy mute guide rail, lengthened stainless steel heating printing platform, printing film is more stable and does not arch film
Simple operation panel: simple operation, Chinese and English system keys, one-key cleaning of the nozzle and ink loading is more convenient, effectively improving work efficiency

We will solve your “trouble”:

Printing method: digital heat transfer,
No plate making, simple process, short timeliness, low cost, low operation difficulty and high cost performance.

1. Significant Saving on printing cost.
2. Environmentally protective, no waste ink.
3. Smooth ink flow for better printing quality.

Flocking Printing
Flocking printing is an innovative technique that involves applying short fibers of various materials such as rayon, cotton or wool to a surface coated with an adhesive. This process not only adds a luxurious velvet or suede-like texture to the material, but also allows for vibrant and customized colors to be achieved through dyeing. By incorporating flocking printing into your designs, you can effortlessly enhance the visual appeal and tactile experience of your printed projects.

The white color set is accurate, and the 1mm small characters are high-definition without strokes;
No stroke, hollow out, no need to open the plate, one piece of printing;
Suitable for any fabric, do it together with light and dark fabrics, print what you want;
Small footprint, one person operation, high temperature and water resistance!

Applicable medium: nylon, chemical fiber, cotton, leather, swimsuit, wetsuit, PVC, EVA, etc.
Powder control: powder shaking control, dusting control, direction, amount control
Rewinding function: automatic induction rewinding

1. The coating is fine and uniform, the printing accuracy is high, and the release is clean
2. Single and double masks, shake the powder clean, tear off hot and cold
3. Applicable to a variety of fabrics, without pre- and post-processing

This powder shaking machine usually together with our 60cm DTF printer, it can keep continous dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer. After curing, you can store the printed PET film for heat transfer use.These released PET films are suitable for any fabric garment printing, like T-shirt printing,chemical fiber, non-woven fabric printing,linen printing,canvas printing,leather printing,silk printing,etc.

1. Roll-to-roll printer products represent the wave of inkjet printing in the 21st century.

2. New ink spray printing method – the computer directly outputs inkjet to create higher printing.

3. The roll-to-roll printer is a “non-contact with the object” inkjet printing type — digital printing equipment

UV flatbed printer print head heating does not heat up, it will directly affect the normal ink out of UV ink, leading to ink cut-off during printing. Especially when the temperature in winter is low, the fluency of UV ink is far less than that in summer. At this time, not only the equipment nozzles and UV ink need to be heated, but the external working environment also needs a suitable temperature. The suitable ambient temperature for UV flatbed printers is between 15° C and 25° C, and the humidity is between 40% and 70%. There are 6 kinds of reasons that the nozzle does not heat up, and it is easy to solve.

UV varnish is a special type of varnish that’s finished using an ultraviolet drying machine. It creates a more vivid, more luxurious and more tactile finish when compared to non-UV varnishes and adds an instant professional look to any printed project. Our UV 3050 Printers with 2 printheads support varnish printig, the uv 6090 Printers with 3 printheads could do this.Varnish is a coating that applies to your printed piece during or after printing. A varnish is added to a piece to enhance the look or to protect the piece from scuffing or scratching. Protect your print when handling or contact with moisture or chemicals.

Shaking powder fixing machine
Accurate alignment of printed patterns
Hot melt adhesive powder is sprayed evenly
Shake powder quickly and efficiently
Automatic drying and color fixing

Although UV printers can print patterns on the surface of hundreds or thousands of materials, due to the characteristics of the surface of different materials, the adhesion of UV ink, flexibility and other performance differences, it will lead to peeling, peeling, etc. on some materials. situation, which requires the use of UV coating to solve this problem.

If the lower plate is iron plate or other materials, it will be easily deformed and aging if it works in a high temperature and high pressure environment for a long time.

When it is found that the pattern printed by the UV flatbed printer has left and right, and the upper and lower deviations are not aligned, it means that the x and y direction is misaligned, and the printing needs to be suspended immediately. Because the structural design and components of the x and y axis are different, the causes of fault and corresponding solutions are also different.

Advantage of UV led ink:
Environmental: no solvents penetrate, ink safety, no waste.
Durable, indoor 10 years, outdoor 3 years.
Robust image, cured graphic
Dry quickly, fast processing.
Direct to rigid uncoated substrates.
To any flat rigid substrates, even small arcuated surface. Can print on flexible substrate like canvas.
shelf life 6 month for white ink, other colors 1 year

Applications of This Desktop UV Flatbed Printer:

Direct Printing on Various Substrates: Print directly on metal, wood, acrylic, plastic, and more, suitable for diverse industries.

AB Film Printing Solution: Ideal for irregular objects like bottles and other unique-shaped items. Explore opportunities in the label printing industry, with crystal sticker labels gaining popularity.

Did you choose the right one? Guide to DTF Transfer Hot Melt Powders

Hot melt powder is the key material in the DTF transfer process. You may be wondering what role it plays in the process. Let’s find out!

Hot melt powder is a white powdery adhesive. It comes in three different grades: coarse powder (80 mesh), medium powder (160 mesh), and fine powder (200 mesh, 250 mesh). Coarse powder is mainly used for flocking transfer, and fine powder is mainly used for DTF transfer. Because it has such great adhesive properties, hot melt powder is often used as a high-quality hot melt adhesive in other industries. It’s very elastic at room temperature, turns into a viscous and fluid state when heated and melted, and solidifies quickly.

PET detached film is a material commonly used in thermal transfer printing, the substrate is PET, after being coated with silicone oil, so it is also called silicone oil film.There are hot peel and cool peel . After anti-static and anti-scratch treatment, the product has a very good adsorption and fit.