High quality hot melt powder for DTF printer

Powder shaking machine usually together with our 60cm DTF printer, it can keep continous automatic dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer. After curing, you can store the printed PET film for heat transfer use.These released PET films are suitable for any fabric garment printing, like T-shirt printing,chemical fiber, non-woven fabric printing,linen printing,canvas printing,leather printing,silk printing,etc.

China’s UV printer industry has been developing for more than ten years, and it has basically reached a bottleneck in terms of flat-panel printing technology at this stage. Throughout these years, the evolution of nozzles has become a main line. Most UV printer manufacturers have started to change Epson nozzles, Seiko nozzles, Konica nozzles to Ricoh nozzles, Toshiba nozzles, Kyocera nozzles, and starlight nozzles. It is also based on the replacement of nozzles in Japan. The core point of the market is the cost-effectiveness of the print head, that is a better balance between speed, accuracy, life, and price.

Symptoms of poor ink output from uv flatbed printers are: flying ink, dripping ink, drawing and so on. There are roughly eight kinds of reasons that cause this kind of failure. In actual application, the UV flatbed printer design varies from different manufacturers. Some may have 10 reasons, and some may have 6 reasons. But mastering the following 7 kinds can solve the problem that 99% of the nozzles have poor ink discharge.

Laser film is a high-tech and environmentally friendly new material developed at the beginning of this century. It can be used to produce composite laser cardboard and transfer laser cardboard through a special production process.

Fully automatic powder shaker, machine features: automatic deviation correction in the front, middle and rear to avoid deviation of the printing film, automatic powder adding function, adding powder once, it takes three hours.

The visual effects of UV printing have three-dimensional effects such as flat ordinary color printing, 3d, 4d, and 5d. Among them, ordinary color printing is also divided into two-color, four-color, six-color, eight-color, eleven-color and so on. The more spot color UV inks are used, the more delicate the pattern display.

A3 new digital offset printer, we develop and produce independently, do not use Epson L1800 and 1390 modification, our machine structure is reasonable and completely similar to industrial machine structure, using PP color management software color does not cast color.

Printing and dyeing of all fiber fabrics, including pure cotton, rayon, linen, modal, wool, silk and other protein fibers; polyester, nylon, acrylic and other chemical fibers and other blended products.
Specifically used in pure cotton fabrics, garments, T-shirts, cut pieces, decorative fabrics, wall coverings, curtains, fabric sofas, bedding.

DTF Printers are an alternative process to DTG printers for T-shirt printing or other garment printing,this direct to film printer use water-based pigment ink to print a film transfer. Once the ink is dry, powdered glue is applied to the back. Now it is heat cured ready for storage or instant use(here need a powder curing machine). It makes no difference on cotton, silk, polyester, synthetic fabrics, genuine leather, or synthetic leather – the DTF printing process can be applied to all of them.

Powder shaking machine usually together with our 60cm DTF printer, it can keep continous automatic dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer. After curing, you can store the printed PET film for heat transfer use.These released PET films are suitable for any fabric garment printing, like T-shirt printing,chemical fiber, non-woven fabric printing,linen printing,canvas printing,leather printing,silk printing,etc.

Advantage:
-Steady peel strength
-Anti static coating treatment
-Competible water based ink
-Bright color, non-stick powder
-Azo free, oeko-tex standard

Simple and easy operation
1. Select a picture
2. Click Print
3. Heat press machine
4. Finish the finished product

This neutral ink was created to enable printing on items such as coolers and plastic bottles without cracking or distorting the image. This type is available for all of TODOJet ’ UV printers, including Cyan, Magenta, Yellow, Black, White, and Varnish.
Full CMYKWW+V color range
High durability

1. Can print cotton T-shirts, sweaters, denim, canvas bags, etc.
2. Double nozzles or four nozzles, with white color output
3. Low-concentration white ink + circulating filter system, no blockage of nozzles
4. The daily output can reach up to 4000 pieces

Compatible with popular RIP software and designed for compact efficiency, the DTF-T652/653/654 represents the pinnacle of printing technology for businesses seeking enhanced capabilities. Upgrade your printing infrastructure today and embrace the future of printing excellence.

Inkjet technology utilizes tiny droplets of ink to facilitate direct printing without the device coming into contact with the printing surface. Because the technology supports non-contact printing, it can be applied to a variety of media and is now being introduced into a wide range of fields from general-purpose to industrial.

The original 6-color ink has more stable color performance, wider color gamut, more colorful picture layers, and greatly improved preservation in terms of light resistance, oxidation resistance and corrosion resistance. Combined with Epson’s micro piezoelectric printing technology, users can enjoy true high-quality print output.

1. Use software draw the pictures , and then use the printer to print the pattern on the PET machine
2.Sprinkle an appropriate amount of hot melt poweron the printed PET film and shake off the excess hot melt power
3. Put the PET film on the heat transfer machine and back for 5-7 minutes ,until the hot melt powder melts , take out the PET film
4. Lay the T shirt flat on the heat transfer amchine and stick the sidesprinkled with hot melt powder on the T shirt for pattern

You need more than a DTF printer, you need an experienced supplier with satisfactory after-sales service in the field to build your brand and grow your profits. Let Todojet help you achieve business success.Latest technology of A3 DTF Printer ,Todojet DTF Printer is equipped with PET film

Our machine has plenty of advantages. The machine is equipped with a paper-shorting device. There is a lack of ink alarm inside each paint box. And our Ink System is Auto ink supply, white ink circulating and stirring. Meanwhile, the temperature control is indeed special among the machine in the market. More importantly, Hansen board. Power board integration is high, with good stability, and neat wiring and simple operation.

Although UV printers can print patterns on the surface of hundreds or thousands of materials, due to the characteristics of the surface of different materials, the adhesion of UV ink, flexibility and other performance differences, it will lead to peeling, peeling, etc. on some materials. situation, which requires the use of UV coating to solve this problem.

Focus · Professional · Special
Meet your customized needs, serve you intimately
TODOjet focuses on serving every customer

The transfer paper can output the pattern to be hot stamped with an inkjet printer, and then print it on the clothes.

UV cold transfer film is an intermediate carrier, exists on the transfer paper or plastic base, carries the printed or printed pattern, and is used to transfer a layer of chemical elastic film on the printed article.

If the lower plate is iron plate or other materials, it will be easily deformed and aging if it works in a high temperature and high pressure environment for a long time.

UV flatbed printers have pass trace, which is theoretically unavoidable, and mechanical errors cannot be eliminated to zero. But the higher the accuracy, the smaller the pass trace phenomenon and will not affect the printing quality. The cause of the pass trace of the pattern: the print feathering is too low, the two-way printing is too fast, the Y-axis belt is loose, the nozzle is in a bad state, and the ink is broken.

With the development of the 5G era, most people choose online shopping, and the emergence of various explosive clothing. In this era of the rise of e-commerce, the choice requirements of young people are gradually increasing, and there are more and more choices of clothing patterns. Young people like personalized customization.

As professional UV printer and DTF printer manufacturer, we not only offer the printers, but also provide the related consumables and spare parts like original and new F1080 xp600 print head DX6 DX10 DX11 4720 i3200 printhead for UV printer and DTF printer machine.

AGP es una fábrica profesional de impresoras UV y DTF en China. Nuestro equipo está compuesto por ingenieros experimentados en el campo de impresoras UV, DTG y DTF. Ofrecemos:

Máquinas de alta calidad
Mejor servicio postventa
Precios de mayorista
Servicios OEM
Recientemente, la impresora DTF A3 roll-to-roll de 30 cm ha ganado gran popularidad. Esta impresora cuenta con:

Dos cabezales
Velocidad rápida
Mayor estabilidad en comparación con la impresora modificada L1800.

1. The coating is fine and uniform, the printing accuracy is high, and the release is clean
2. Single and double masks, shake the powder clean, tear off hot and cold
3. Applicable to a variety of fabrics, without pre- and post-processing