Hot sale A3 UV Film lamination pet laserable soft Bopp decorative rainbow film

After the pattern is printed by the DTF Printer, the powder shaking machine is used to evenly shake the hot melt powder on the white ink part, and then heat and dry, and the finished hollow heat transfer can be printed directly. And it can be customized one by one, so it is very suitable for personalized heat transfer clothing customization.

TODOjet is a professional manufacture of DTF printer,we can also offer you heat transfer pet film powder dusting, shaking and heating machine. Printed film can be heat transferred on any kind of fabrics.

TYPE: UV INK
SUITABLE FOR: Printer with Epson DX7 DX5 XP600 TX800 head
COLOR: CMYK+LC+LM+White+Varnish
TESTING: 100% testing on the machine before shipment
HARD UV INK:
mainly printing on hard type materials, like Wood, Glass, Acrylic, Metal, Crystal, etc.
SOFT UV INK:
mainly printing on soft type materials, like leather, vinyl, TPU, EVA, wall paper, lamp box, etc.

UV printers can print the following three effects:
1.Flat color printing
2.Flat 3D color printing
3.3D relief(embossing)

Heat transfer has high requirements for the selection of ink, hot melt powder and transfer film, which is related to the quality of printing and the service life of the machine. The supporting consumables recommended by our factory are the optimal quality and the best supporting scheme.

1.High colour density, wide colour gamut, outstanding colour saturation.

2.suitable with a variety of materials.

3. Excellent performance

4. Great wash fastness

5.Non-toxic and environmentally friendly

The poor adhesion of the material pattern of the UV flatbed printer is a headache. The printed pattern is peeled off with a slight scratch. Even if the printing effect is even better, it has no shelf life and practicality. There are six reasons for this: temperature and humidity relations, ink deterioration, material problems, UV lamp problems, too fast speed,the ink is not dry, and residual cleaning liquid.

The transfer paper can output the pattern to be hot stamped with an inkjet printer, and then print it on the clothes.

In the process of printing patterns on UV flatbed printers, printing errors sometimes occur. This kind of problem is generally caused by poor contact of the decoder, damage to the decoder, misalignment of the grating strip, overrun of the image array, and wrong printing direction, software damage,ect.

Powder machine usually come with DTF printer, for printed film powder coating and curing.Then the film can be transferred on any kind of fabric materials.

With 10 years experiences in printing filed, TODOjet can offer you the DTF printer with high qulity, professional package and good service. All our T-shirt printers need to through the strict quality testing.And TODOjet and offer you one stop solutions service,besides PET film printer, we can also offer you hot melt powder machine, heat press machine and also consumbles like pigment ink, hot melt powder,pet film and other parts that you need.

Many factors will affect the printing accuracy of the uv printer. For example, the pixel of the pattern, the higher the pixel, the clearer and better the printed pattern; The size of the nozzle of the nozzle;The smaller the nozzle, the smaller the ink droplets and the better;The software technology level of the manufacturer, the higher the level, the better the color printing effect.

1.Universal matching, easy to use, small size, time-saving and labor-saving
2. Suitable for digital printing and other industries
3. Digital offset heat transfer, one-piece molding
4. No engraving, no waste discharge, no white edge, environmental protection
5. Timing control switch, timing at will
6. Full body sheet metal design, durable and durable
7. Comes with a baking tray limit device, which is more convenient
8. Equipped with power fuse device, more assured to use

DTF-T30 A3 DTF Printer Features

Advanced Printheads: Equipped with 2 or 3 Epson I1600-A1 printheads for precise and high-speed printing.
Vivid Color Output: Dual CMYK + White ink configuration ensures vibrant, full-color prints with crisp, high-opacity white details for multi-material transfers.
Fast Printing Speed:
6 PASS: 12m²/h
8 PASS: 8m²/h
Ideal for both fast production runs and high-resolution detailed prints.

DTF PET film with different size for your reference, 30cm*100m/roll and 60cm*100m/roll. This anti-static PET film for cold peel, it can feed continously during printing.Meanwhile, we can also offer other DTF printer consumbles like hot melt powder and pigment ink.

Heat transfer medium：T-shirt, sweater, down jacket, canvas bag, jeans, polyester, cotton, cotton, silk, couples wear, parent-child wear, spandex non-woven fabric, cotton cloth, ready-to-wear, chiffon, scarf, vest, underwear, cashmere sweater, book edge, pillowcase, etc.

UV DTF AB Film for digital uv dtf printer is hot, there are different types in the market. Some film A needs to print on transparent film, then laminating film B with heating; some film A needs to white paper film, then laminating film B with heating. Our this new upgraded AB film is printing on whtie paper side, then laminating film B with only pressure, no need heating.

AGP es una fábrica profesional de impresoras UV y DTF en China. Nuestro equipo está compuesto por ingenieros experimentados en el campo de impresoras UV, DTG y DTF. Ofrecemos:

Máquinas de alta calidad
Mejor servicio postventa
Precios de mayorista
Servicios OEM
Recientemente, la impresora DTF A3 roll-to-roll de 30 cm ha ganado gran popularidad. Esta impresora cuenta con:

Dos cabezales
Velocidad rápida
Mayor estabilidad en comparación con la impresora modificada L1800.

Recently, many people have asked what is the difference between white ink heat transfer and heat transfer? In short, both of them are suitable for clothing and textiles, but they are very different in terms of color fastness and craftsmanship. Today, we use these two common machines in the market to make a technical comparison. Let’s take a look at it. Where is the difference between the two.

Things to note:

1. The finished UV film must be trial-printed before mass production. After the trial printing is qualified, mass production can be carried out.

2. Unused UV film products should be bagged and sealed. Make sure the products are dry and do not store them exposed to moisture and high temperatures.

3. This product information is true and accurate. AGP declares that it does not assume any liability for incidental or consequential losses;

Our UV diy 6040 size cylinder phone case universal digital flatbed New Launched acrylic uv silicone ODM a3 digital flatbed uv High quality wood glass metal acrylic plastic leather phone shell case uv led Ceramic uv flat bed printer a2 6040 focus alpha jet uv printing machinesticker printing machine for golf was warm welcomed by our clients.

The digital direct injection process of pure cotton paint, which has been developed for many years, is the most variable in digital printing at present, but its color, fastness and hand feel have been improved to varying degrees. Among them, the most innovative improvement is the combination of The silk screen paste process and the white ink direct injection process, these two process schemes have greatly increased the market share of the coating direct injection process.

Advantage of UV led ink:
Environmental: no solvents penetrate, ink safety, no waste.
Durable, indoor 10 years, outdoor 3 years.
Robust image, cured graphic
Dry quickly, fast processing.
Direct to rigid uncoated substrates.
To any flat rigid substrates, even small arcuated surface. Can print on flexible substrate like canvas.
shelf life 6 month for white ink, other colors 1 year

1. The coating is fine and uniform, the printing accuracy is high, and the release is clean
2. Single and double masks, shake the powder clean, tear off hot and cold
3. Applicable to a variety of fabrics, without pre- and post-processing

Our machine has plenty of advantages. The machine is equipped with a paper-shorting device. There is a lack of ink alarm inside each paint box. And our Ink System is Auto ink supply, white ink circulating and stirring. Meanwhile, the temperature control is indeed special among the machine in the market. More importantly, Hansen board. Power board integration is high, with good stability, and neat wiring and simple operation.

The difference between white ink heat transfer and heat sublimation
The temperature and time of hot stamping are different:
Generally speaking, the hot stamping temperature of white ink heat transfer is about 160 degrees, and the time is about 13 seconds (the hot melt adhesive used by different manufacturers is different, the temperature and time of hot stamping may be different, but most of the values are in this range) , and the sublimation paper temperature is between 200-230 degrees, and the time is about 15-20 seconds.

Using the shake powder could consider these procedures.
Dusting.
1.What is the powder sprinkled with?Hot melt powder, when the heat is sticky, after the formation of glue coating;
2.Why?Stick hot melt stick to the dry ink to help eventually form the coating;
3.How to sprinkle, sprinkle how fast?Can adjust the knob on the shake powder machine;
4.How much?The powder is about 2-3cm thick to stop sprinkling the powder.
Shaking.
1.Why shake powder?Shake off the excess powder on the ink and film adhesion, so that the powder is thin and evenly attached to the ink.
2.Shake powder speed.Depending on the situation, the knob on the condition machine, about 2-3 gear ok.
Drying.

1.Why drying?Melt the hot melt powder to create a reprint pattern coating;.
2.How long will it bake?Undefinite, depending on the specific situation, mainly to ensure that the pattern feels no powder, hot melt powder all melted into coating.
3.Temperature? 90-130 ° C is ok.

White ink and color ink come out with the environmentally friendly paint heat transfer solution, and the subversive garment heat transfer application process solves the problem of picky fabrics in the direct-injection printing process. The new heat transfer process is not limited to material transfer and no longer needs to worry about color difference and color fastness Problem, Pattern WYSIWYG.

UV flatbed printers have pass trace, which is theoretically unavoidable, and mechanical errors cannot be eliminated to zero. But the higher the accuracy, the smaller the pass trace phenomenon and will not affect the printing quality. The cause of the pass trace of the pattern: the print feathering is too low, the two-way printing is too fast, the Y-axis belt is loose, the nozzle is in a bad state, and the ink is broken.

Symptoms of poor ink output from uv flatbed printers are: flying ink, dripping ink, drawing and so on. There are roughly eight kinds of reasons that cause this kind of failure. In actual application, the UV flatbed printer design varies from different manufacturers. Some may have 10 reasons, and some may have 6 reasons. But mastering the following 7 kinds can solve the problem that 99% of the nozzles have poor ink discharge.