Hot Sell TODOjet 30cm desktop xp600 dtf pet film printer A3 dtf printer and shaker oven

DTF Printing is also referred to as Direct To Film Printing, and it works by printing transfers that are heat pressed to a variety of garments (and other substrates).When you have this machine, you can…Print on any kind of fabric, no matter dark or light. There can be more varieties in your product line. Save labor costs, and one employee can operate the machine. Faster production can have a good effect.

1.Versatility on materials : DTF can be applied on a wide range of materials including cotton, nylon, treated leather, polyester, 50/50 blends and more (light and dark fabrics).
2.Cost-effective: can save up to 50% white ink; supplies are also significantly more affordable.
3.Wash ability: has been proven through testing to be equal to if not better than traditional direct-to-garment (DTG) printing.

Direct to film printer is a kind of printing machine, which can be printed on the clothes, cups, plates, hats, stones, glass, metal, etc., clothes and cups on the most printed. You can open a hot painting shop, with a small investment cost and a promising market, which is also suitable for individuals to open a business.

-Steady peel strength
-Anti-static coating treatment
-Compatible water-based ink
-Bright color, non-stick powder
-Azo free, oeko-tex standard

With 13 years experiences in printing filed, TODOjet can offer you the DTF printer with high quality, professional package and good service. All our T-shirt printers need to through the strict quality testing.And TODOjet and offer you one-stop solutions service,besides PET film printer, we can also offer you hot melt powder machine, heat press machine and also consumables like pigment ink, hot melt powder,pet film and other parts that you need.

Good chemical stability, can be stored at room temperature for a long time without deterioration.

TODOJet direct film printer creat a new solution about garment printing,with both breathable vents and fluorecent colors printing function. Breathable vents can make sure the T-shirt wearing more comfortable,and fluorecent orange and green can make your T-shirt looks more special. More details about our deaktop A3 DTF printer,kindly contact with us!

Heat transfer is widely used in T-shirt printing. When choosing to customize, we should focus on the color of the pattern and the method of heat transfer, and decide the way to tear off the film. Now there are mostly two ways in the market: hot peeling and cold peeling. Next, we will analyze these two ways from the following aspects: composition of the ingredient, pressing temperature, pressing time, film tearing time, glossiness and so on.

DTF Printer and DTF Powder Oven (A3 size) widely used to customize the T-shirt, hoodie, scokes, shoes, bags, etc
TODOjet mainly engaged in the sales of digital printing equipment, our company’s products are sublimation printer/white ink hot stamping powder shake machine/ sublimation heat transfer machine/thermal transfer paper/ transfer ink/white ink hot stamping supplies.

PET transfer film technology is widely used recently, and the application covering clothing, shoes and hats, toys, bags, bedding, daily necessities, etc. In other hand,Printed PET film can be transferred on hard materials like wood board. Anyway,this new technology has gradually replaced the direct traditional printing, leading the trend of The Times.

Lack of paper sensing alarm function, to ensure accurate delivery of paper：It is also a self-developed patented technology, the constant tension paper feeding system, which ensures the accuracy of paper feeding by adjusting the tension of the paper feeding paper, which greatly improves the printing quality.

TODOjet new A3 DTF printer with two Epson F1080 (XP600) printhead, support fluorescent color printing like orange and green. Printing speed can reach to 4 sqm/h (about 13.5 m length).This direct to film printer no limit of fabric materials printing, suitable for any garment printing shop.

Advantage:
-Steady peel strength
-Anti static coating treatment
-Competible water based ink
-Bright color, non-stick powder
-Azo free, oeko-tex standard

TODOJet A3 DTF Printer with two original F1080 printhead –fast speed and more stable than L1800 modified printer. The speed can reach to 4.5~5 sqm/h, which means one roll material (30cm*100m) just need 6 hours. And one roll PET film can do 250pcs (A3 size) T-shirts. If just LOGO, maybe can do more than 1000 pcs T-shirts. And it can be suitable for any kind of fabric printing.

-Steady peel strength
-Anti static coating treatment
-Competible water based ink
-Bright color, non-stick powder
-Azo free, oeko-tex standard

1. Before printing, clean the dirt and dust on the printing platform area and the surface of the printing medium to prevent the electrostatic characteristics of the printing process from attracting dust on the surface of the nozzle, causing the nozzle hole to be blocked.
2. After starting up and before shutting down, print the nozzle test strip to check the status of the nozzle. If there is a blockage or oblique spray, it should be cleaned in time.

Automatic powder shaker:

Machine Features:

1. Automatic deviation correction before, middle and back to avoid deviation of the printing film

2. Automatic powder adding function, add powder once, it will take three hours

DTF Printer is Direct to film printer which is print on transfer film first then press on any fabric, the advantage as below:
No limit of fabric materials
No need pre-coating
No need plate making
No need contour cutting
Environment-friendly pigment ink
Small invest, large benefit

Good quality dtf ink for tshirt printer machine makes good printing performance.
CMYK and White ink each color 1L/bottle.

A process often used in the printing of T-shirts is heat transfer. So how much do you know about the classification and operation of heat transfer machines?Heat press machine product features: electronic digital thermostat to control the temperature, high accuracy (plus or minus 2 °C)

High quality DTF shaker powder shaking dryer, usually together for XP600/4720/i3200 DTF printer or other DTF printing machine. Mainly used for hot melt dusting and curing during printing. We have different powder shaking machine can meet your different printing speed like 2 head printer powder shaker and 4 heads printer powder shaker.

With the continuous advancement of digital printing technology and the continuous updating and iteration of equipment, digital printing machines have risen rapidly in the industry with more and more advanced digital printing technology, and have become the choice of more and more printers. Especially in the economically developed areas, such as Shanghai, Guangzhou, etc., the proportion of digital printing machines continues to increase, and it is sweeping across the country with a good development trend. So what are the advantages of DTF film printer？Why do more and more printing manufacturers choose it?

1. Reel printing, film output
2. Pass through the powder box and come out of the film
3. From the periphery of the powder shaking motor, the film is released
4. Pass through the oven plate, out of the film
5. Fix the front end of the PET film to the rewinding drum

TODOjet digital offset heat transfer only needs to invest a set of heat transfer printer and powder shaker. Basically, the investment is in place at one time. The floor area is less than the size of a parking space, and it is a one-stop hollow printing and automatic powder shaking. The finished painting is very efficient.

DTF Printing is also referred to as Direct To Film Printing, and it works by printing transfers that are heat pressed to a variety of garments (and other substrates). When you have this machine, you can print on any kind of fabric, no matter dark or light. There can be more varieties in your product line. Save labor costs, and one employee can operate the machine.No need for pretreatment like a DTG printer, also no need to make plate like a screen-printer. Our A3 DTF with two printheads support faster production like 520+ T-shirts LOGO printing in a day.

No limit of fabric materials
No need pre-coating
No need plate making
No need contour cutting
Fast speed with 2pcs Epson i3200
Environment-friendly Pigment ink

White ink and color ink come out with the environmentally friendly paint heat transfer solution, and the subversive garment heat transfer application process solves the problem of picky fabrics in the direct-injection printing process. The new heat transfer process is not limited to material transfer and no longer needs to worry about color difference and color fastness Problem, Pattern WYSIWYG.

Thermal transfer heat transfer has a wide range of uses, a wide variety of processes, and the effects are constantly updated. The names are different, also called hot stamping, transfer printing, etc.

Introducing our Wholesale Price 30cm UV DTF Printer AGP F30, featuring the Epson F1080 Printhead and Integrated Laminator for Glass, Cup Wraps, Stickers, and more.

The white ink heat transfer process is green and environmentally friendly, and can be used in children’s products, children’s clothing, children’s shoes, children’s school bags, toys, etc. Heat transfer is a very popular printing process, which can be printed in one piece or mass-produced. It is suitable for the current personalized customization and network customization market. White ink heat transfer is a green and pollution-free printing process, which meets the requirements of regional environmental protection and is also very good in import and export.