Hotsale high Viscosity LED UV Ink For Epson XP600 TX800 DX5 DX7 Printer Head

The heat transfer film printer is not limited by the pattern, no matter how complicated the pattern is, it can be printed out, and the new TODOjet A3 DTF heat transfer printer provides 8-color, 7-color, 4-color ink configurations according to individual uses and purposes. Contains value-enhancing white inks and metallic silver inks that feature high-precision color reproduction.

TODOjet is a good UV printer supplier in China,we have full series small UV printers with good quality.In order to let more customers know our printers and lastest technology,we attend many exhibitions every year, such as DPES expo in Guangzhou, APPP Expo and Sign China Expo in Shanghai. We also attend many famous oversea exhibitions in printing field, such as FESPA exhibition, SGI exhibition,etc. We have 100 pcs A3 UV DTF Film A and film B with high quality .

Using the shake powder could consider these procedures.
Dusting.
1.What is the powder sprinkled with?Hot melt powder, when the heat is sticky, after the formation of glue coating;
2.Why?Stick hot melt stick to the dry ink to help eventually form the coating;
3.How to sprinkle, sprinkle how fast?Can adjust the knob on the shake powder machine;
4.How much?The powder is about 2-3cm thick to stop sprinkling the powder.
Shaking.
1.Why shake powder?Shake off the excess powder on the ink and film adhesion, so that the powder is thin and evenly attached to the ink.
2.Shake powder speed.Depending on the situation, the knob on the condition machine, about 2-3 gear ok.
Drying.

1.Why drying?Melt the hot melt powder to create a reprint pattern coating;.
2.How long will it bake?Undefinite, depending on the specific situation, mainly to ensure that the pattern feels no powder, hot melt powder all melted into coating.
3.Temperature? 90-130 ° C is ok.

Product attribute introduction: UV ink printing transfer sticker, suitable for hard surface, plane, curved surface and other objects

TODOjet offer you a brand new solution of digital PET transfer film color printing
-Saving Manpower
-No Engraving
-Widely Usage
-User Friendly
-No Waste Discharging

Heat transfer has high requirements for the selection of ink, hot melt powder and transfer film, which is related to the quality of printing and the service life of the machine. The supporting consumables recommended by our factory are the optimal quality and the best supporting scheme.

You can print on AGP paper Glitter Gold DTF Film directly with your existing DTF printer and DTF ink, without changing any consumable or DTF printer setting. This Glitter Gold DTF Film works on T-shirts, bags, shoes, socks and other materials, provides you intense sparkle and shine to your prints. The new product has the advantages of glitter Gold effect, high ink absorption, no ink-bleeding, easy peel, and washable.

The craftsmanship level of the clothing customization industry shows a trend of continuous evolution and development. The addition of a variety of new custom materials has broken the stereotyped custom style in the industry and created several craft combinations. While on-demand printing is gradually accepted by the public, printing technology has also received more attention.

At present, the most widely used laser films on the market mainly include laser aluminized films and laser bronzing films.

UV DTF AB Film for digital uv dtf printer is hot, there are different types in the market. Some film A needs to print on transparent film, then laminating film B with heating; some film A needs to white paper film, then laminating film B with heating. Our this new upgraded AB film is printing on whtie paper side, then laminating film B with only pressure, no need heating.

DTF-T30 A3 DTF Printer Features

Advanced Printheads: Equipped with 2 or 3 Epson I1600-A1 printheads for precise and high-speed printing.
Vivid Color Output: Dual CMYK + White ink configuration ensures vibrant, full-color prints with crisp, high-opacity white details for multi-material transfers.
Fast Printing Speed:
6 PASS: 12m²/h
8 PASS: 8m²/h
Ideal for both fast production runs and high-resolution detailed prints.

In DTF printing:

Special pigment ink is applied to PET film.
A powdered glue is then applied to the back and heat cured for immediate or storage-ready use.
This method offers versatility across non-cotton materials and avoids the complexities of pre-treatment or plate-making required in traditional methods. DTF printers are often paired with powder dryer machines to enhance the printing process.

Top cover,6 heat tubes
Master switch,Sealant strip surround
A3 film tray,Cold fan
TEMP setup and timing settings

The poor adhesion of the material pattern of the UV flatbed printer is a headache. The printed pattern is peeled off with a slight scratch. Even if the printing effect is even better, it has no shelf life and practicality. There are six reasons for this: temperature and humidity relations, ink deterioration, material problems, UV lamp problems, too fast speed,the ink is not dry, and residual cleaning liquid.

De øvre og nedre platene skal være laget av aluminium, og varmerøret skal støpes inne i aluminiumsplaten. For eksempel, hvis den øvre platen er slisset på en aluminiumsplate, og deretter festet til den med et varmerør, vil det forårsake unødvendig energitap, og det vil ha ulemper som langsom oppvarming og stor temperaturforskjell i konstant temperatur under bruk .

1. Use software draw the pictures , and then use the printer to print the pattern on the PET machine
2.Sprinkle an appropriate amount of hot melt poweron the printed PET film and shake off the excess hot melt power
3. Put the PET film on the heat transfer machine and back for 5-7 minutes ,until the hot melt powder melts , take out the PET film
4. Lay the T shirt flat on the heat transfer amchine and stick the sidesprinkled with hot melt powder on the T shirt for pattern

Printing and dyeing of all fiber fabrics, including pure cotton, rayon, linen, modal, wool, silk and other protein fibers; polyester, nylon, acrylic and other chemical fibers and other blended products.
Specifically used in pure cotton fabrics, garments, T-shirts, cut pieces, decorative fabrics, wall coverings, curtains, fabric sofas, bedding.

Wide color gamut and high color reproduction:Print what you want, and give you a more real experience with full colors High-speed printing without manual after-sales worry-free High-speed printing mass production

Type: DTF Gradient Film Size: 60cm & 30cm*100m/roll Tear off Method: Cold Peel Warranty: 3 Years Note: Store in Dry & Damp-proof Environment

During the curing process, the hot melt powder may produce some gas, here we need the air purifier for cleaning. TODOjet can offer you one-stop solutions of DTF printing, such as the DTF printer, powder shaker machine,PET film, hot melt powder,pigment ink and so on.

Pure black when printing is generally used for smaller characters. If the full-color black (C100 M100 Y100 K100) is used, the ink concentration is too high, the ink is not easy to dry and easy to print. Therefore, it is recommended to use monochrome black (C0 M0 Y0 K100).

use:
1. Heat transfer printing
2. Making printing glue
3. Screen printing

Do I need an A3 laminator? If you want to laminate small or medium-sized documents such as recipe cards, ID tags or up to A4 size documents, then an entry width, such as an A3 laminating machine, is all that is required. Especially for larger documents or items up to A3 size, a wide format laminator such as A3 laminating machines is ideal.

Although UV printer can print patterns on the surface of hundreds of materials or thousands of materials, due to the differences in the characteristics of the surface of different materials, the adhesion of UV ink, and flexibility, some materials will peel off and peel off Situation, this requires UV coating primer to solve this problem.

TYPE: UV INK
SUITABLE FOR: Printer with Epson DX7 DX5 XP600 TX800 head
COLOR: CMYK+LC+LM+White+Varnish
TESTING: 100% testing on the machine before shipment
HARD UV INK:
mainly printing on hard type materials, like Wood, Glass, Acrylic, Metal, Crystal, etc.
SOFT UV INK:
mainly printing on soft type materials, like leather, vinyl, TPU, EVA, wall paper, lamp box, etc.

How to use UV transfer sticker
1. Remove the transfer sticker and tear it off
2. Align the position and paste it
3. Remove the transparent film after pressing the pattern
4. Paste completed

Many factors will affect the printing accuracy of the uv printer. For example, the pixel of the pattern, the higher the pixel, the clearer and better the printed pattern; The size of the nozzle of the nozzle;The smaller the nozzle, the smaller the ink droplets and the better;The software technology level of the manufacturer, the higher the level, the better the color printing effect.

When many friends buy a UV printer, the general manufacturer will promise the machine warranty for 1 year or 2 years or 3 years, etc., but there is a saying: Ink circuit system and print heads are not covered by the warranty.

Heat transfer medium：T-shirt, sweater, down jacket, canvas bag, jeans, polyester, cotton, cotton, silk, couples wear, parent-child wear, spandex non-woven fabric, cotton cloth, ready-to-wear, chiffon, scarf, vest, underwear, cashmere sweater, book edge, pillowcase, etc.

Our UV diy 6040 size cylinder phone case universal digital flatbed New Launched acrylic uv silicone ODM a3 digital flatbed uv High quality wood glass metal acrylic plastic leather phone shell case uv led Ceramic uv flat bed printer a2 6040 focus alpha jet uv printing machinesticker printing machine for golf was warm welcomed by our clients.