Nueva Impresora DTF A3 de 30 cm con Película PET y Máquina de Secado con Agitador de Polvo 3*Epson I1600 – Todo en Uno

As Christmas approaches, most users’ UV flatbed printers will face a non-use state for more than 7 days. Coupled with the influence of the cold weather in winter, the maintenance of the equipment will be more thorough and comprehensive than usual. This article mainly discusses how to maintain the nozzle, core components, and external environment.

In the process of printing patterns on UV flatbed printers, printing errors sometimes occur. This kind of problem is generally caused by poor contact of the decoder, damage to the decoder, misalignment of the grating strip, overrun of the image array, and wrong printing direction, software damage,ect.

Powder shaking machine usually together with our 60cm DTF printer, it can keep continous automatic dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer. After curing, you can store the printed PET film for heat transfer use.These released PET films are suitable for any fabric garment printing, like T-shirt printing,chemical fiber, non-woven fabric printing,linen printing,canvas printing,leather printing,silk printing,etc.

It is worth noting that the materials that can be printed on Koch’s digital heat transfer include cotton fabrics, high-elastic fabrics, nylon fabrics, chemical fiber fabrics, swimwear, denim, PVC, EVA, etc. There is basically no limitation on fabrics.

TODOjet offer you a brand new solution of digital PET transfer film color printing
-Saving Manpower
-No Engraving
-Widely Usage
-User Friendly
-No Waste Discharging

The reasons for the white color registration and color registration problems of uv flatbed printers are: the print head is not vertical, the print head is in a bad state, the height is wrong, the two-way is not adjusted properly, and the software data parameter is set. The manifested features are pattern leakage, image shift and dislocation.

The difference between white ink heat transfer and heat sublimation
The temperature and time of hot stamping are different:
Generally speaking, the hot stamping temperature of white ink heat transfer is about 160 degrees, and the time is about 13 seconds (the hot melt adhesive used by different manufacturers is different, the temperature and time of hot stamping may be different, but most of the values are in this range) , and the sublimation paper temperature is between 200-230 degrees, and the time is about 15-20 seconds.

1. Simple control buttons
The key functions are clear and easy to operate, just one touch
2. Four-color printing
The colors are more vivid and rich, and the hot stamping effect is good

When it is found that the pattern printed by the UV flatbed printer has left and right, and the upper and lower deviations are not aligned, it means that the x and y direction is misaligned, and the printing needs to be suspended immediately. Because the structural design and components of the x and y axis are different, the causes of fault and corresponding solutions are also different.

DTF PET film with different size for your reference, 30cm*100m/roll and 60cm*100m/roll. This anti-static PET film for cold peel, it can feed continously during printing.Meanwhile, we can also offer other DTF printer consumbles like hot melt powder and pigment ink.

UV inks used in UV printers can be divided into hard ink and soft ink according to the hardness properties of the printing material. Rigid, non-bending, non-deforming materials such as glass, ceramic tile, metal plate, acrylic, wood, etc., use hard ink; elastic, bendable, twisting materials such as leather, soft film, soft PVC, etc., Use soft ink.

Heat transfer has high requirements for the selection of ink, hot melt powder and transfer film, which is related to the quality of printing and the service life of the machine. The supporting consumables recommended by our factory are the optimal quality and the best supporting scheme.

As professional UV printer and DTF printer manufacturer, we not only offer the printers, but also provide the related consumables and spare parts like original and new F1080 xp600 print head DX6 DX10 DX11 4720 i3200 printhead for UV printer and DTF printer machine.

The white color set is accurate, and the 1mm small characters are high-definition without strokes;
No stroke, hollow out, no need to open the plate, one piece of printing;
Suitable for any fabric, do it together with light and dark fabrics, print what you want;
Small footprint, one person operation, high temperature and water resistance!

Fully automatic powder shaker, machine features: automatic deviation correction in the front, middle and rear to avoid deviation of the printing film, automatic powder adding function, adding powder once, it takes three hours.

UV flatbed printers have pass trace, which is theoretically unavoidable, and mechanical errors cannot be eliminated to zero. But the higher the accuracy, the smaller the pass trace phenomenon and will not affect the printing quality. The cause of the pass trace of the pattern: the print feathering is too low, the two-way printing is too fast, the Y-axis belt is loose, the nozzle is in a bad state, and the ink is broken.

Advantage of UV led ink:
Environmental: no solvents penetrate, ink safety, no waste.
Durable, indoor 10 years, outdoor 3 years.
Robust image, cured graphic
Dry quickly, fast processing.
Direct to rigid uncoated substrates.
To any flat rigid substrates, even small arcuated surface. Can print on flexible substrate like canvas.
shelf life 6 month for white ink, other colors 1 year

Although UV printer can print patterns on the surface of hundreds of materials or thousands of materials, due to the differences in the characteristics of the surface of different materials, the adhesion of UV ink, and flexibility, some materials will peel off and peel off Situation, this requires UV coating primer to solve this problem.

K-PRINT is one of the largest and most influential international exhibitions in Korea, with an exhibition scale of 25,000 square meters and more than 400 exhibitors. It is an exhibition with great development prospects selected by the Ministry of Industry, Trade and Resources of Korea. , is also a printing feast created by the official comprehensively integrating multiple resources.

Regarding to Epson printhead UV printer, most supplier suppliers use positive pressure for ink supply, this required that the ink level should keep higher about 20cm than the head nozzles(like 6090UV model),so that can make sure the ink output fluency.

1,Rail maintenance
2,Platform maintenance
3,Damper replacement
4,capping Replacement

Type: DTF Gradient Film Size: 60cm & 30cm*100m/roll Tear off Method: Cold Peel Warranty: 3 Years Note: Store in Dry & Damp-proof Environment

Type:Water Based Ink
Printing Type:Digital printing
Place of Origin:Henan
Brand Name:TODOjet
Model Number:CMYKLcLmW
Key name:Textile Pigment ink 6 Color DTF Printer Ink For Inkjet Printer

TODOjet DTF printer can offer related consumbles like hot melt powder machine, relased PET film and hot melt powder. We have both 30cm*100m and 60cm*100m roll PET film for option, which used for cold peel transfer. You can printing direct to this film with our DTF printer. And this film is the correct micron thickness for powder shaking machine (automated curing machines).

Five Guarantees
1. Quality: no fading, strong stickiness
2. Factory: source manufacturers, innovation and worry-free
3. Team: one-to-one service, free design
4. Choice: a variety of crafts for you to choose
5. After-sale: quality problem, free re-send

UV printing is one of the most flexible and exciting print processes ever created, and its uses are almost limitless. For regular object, UV Printing is so convenient. But for irregular object, there are some problems, the AB film solution  is  suitable  for these irregular object and you can also develop a new market of label printing industry. Its just expand the application of UV flatbed printer.

Did you choose the right one? Guide to DTF Transfer Hot Melt Powders

Hot melt powder is the key material in the DTF transfer process. You may be wondering what role it plays in the process. Let’s find out!

Hot melt powder is a white powdery adhesive. It comes in three different grades: coarse powder (80 mesh), medium powder (160 mesh), and fine powder (200 mesh, 250 mesh). Coarse powder is mainly used for flocking transfer, and fine powder is mainly used for DTF transfer. Because it has such great adhesive properties, hot melt powder is often used as a high-quality hot melt adhesive in other industries. It’s very elastic at room temperature, turns into a viscous and fluid state when heated and melted, and solidifies quickly.

Do I need an A3 laminator? If you want to laminate small or medium-sized documents such as recipe cards, ID tags or up to A4 size documents, then an entry width, such as an A3 laminating machine, is all that is required. Especially for larger documents or items up to A3 size, a wide format laminator such as A3 laminating machines is ideal.

The main purpose of the UV print head cleaning liquid is to clean the internal channels of the print head to keep it open and smooth the ink discharge.

Q: What are the printhead of UV printers?

A: The printhead of UV printers mainly include the following types: Ricoh, Epson, Kyocera, Toshiba, Seiko, Konica, and the most used ones are Epson fifth-generation printhead, Epson 4720 printhead, Epson tenth-generation printhead and Ricoh G5 printhead, Epson It is a non-industrial sprinkler, the others are industrial printhead.