Offset A3A4 high-speed white ink heat transfer clothing DIY printing printer T-shirt heat transfer film personality heat transfer

DTF Features:
1. Free edition, fast printing speed, low cost, instant, low power consumption, breaking the limitations of traditional color printing production, can print any type.
2. The integrated design of printing white + color composite process reduces the printing cost of the darkest fabric and increases the production capacity.
3. The machine has the function of skipping white, which can save more time for users.
4. The built-in software can be used for printing emergency, and the pause function can wait for the problem to be solved before printing, which avoids the user’s property loss.

The color problems of UV flatbed printer pattern printing are as follows: the picture is color cast, the color different is serious, the color is not clear. There are 6 reasons: different inks, different ink dots, external temperature, ink deposition, software fault, and adjusting color problems.

Advantage of uv led ink:
Environmental: No Solvents Penetrate, Ink Safety, No Waste.
Durable, Indoor 10 Years, Outdoor 3 Years.
Robust Image, Cured Graphic
Dry Quickly, Fast Processing.
Direct To rRgid Uncoated Substrates.
To Any Flat Rigid Substrates, Even Small Arcuated Surface. Can Print on Flexible Substrate Like Canvas.
Shelf Life 6 Month For White Ink, Other Colors 1 Year

Recently, many people have asked what is the difference between white ink heat transfer and heat transfer? In short, both of them are suitable for clothing and textiles, but they are very different in terms of color fastness and craftsmanship. Today, we use these two common machines in the market to make a technical comparison. Let’s take a look at it. Where is the difference between the two.

When something temporarily leaves for a short time and no longer operates, the UV flatbed printer is set to the standby state, and the x-axis and y-axis are also static. If the x-axis carriage movement is found, it means that the fiber cable is damaged or loose.

Each digital inkjet printer comes in a similar way: a print head.All component print heads for small or large formate inkjet printers, printing ink on all different types of media.The inkjet print heads spray the ink onto paper or other media in a controlled way to provide the desired image. Our TODOjet printesr usually use the Epson F1080 and Epson i3200 printhead.

The powder shaker is rotated at a high speed and the heat transfer material is hit, so that the powder on the material will be shaken more evenly and the excess powder on the material will not be adsorbed on the invalid picture.

If the ink dots or lines per foot are used as the key factor for the print quality of UV printers, it seems a bit oversimplified. Other important factors have not been taken into account. Some factors are related to UV printer systems, and some are related to UV ink quality , Not specific to the print head.

Do I need an A3 laminator? If you want to laminate small or medium-sized documents such as recipe cards, ID tags or up to A4 size documents, then an entry width, such as an A3 laminating machine, is all that is required. Especially for larger documents or items up to A3 size, a wide format laminator such as A3 laminating machines is ideal.

Wide color gamut and high color reproduction:Print what you want, and give you a more real experience with full colors High-speed printing without manual after-sales worry-free High-speed printing mass production

Things to note:

1. The finished UV film must be trial-printed before mass production. After the trial printing is qualified, mass production can be carried out.

2. Unused UV film products should be bagged and sealed. Make sure the products are dry and do not store them exposed to moisture and high temperatures.

3. This product information is true and accurate. AGP declares that it does not assume any liability for incidental or consequential losses;

According to the shape and function of the ironing board: flat pressing machine (mainly used for the collection of sizes and specifications of clothing and apparel fabrics).

Flocking Printing
Flocking printing is a common method in the clothing printing industry known for its strong three-dimensional effect, fluffy feel, and comfortable texture, which distinguish it from other printing and hot stamping methods. The thickness is typically 0.7 mm.

The main purpose of the UV print head cleaning liquid is to clean the internal channels of the print head to keep it open and smooth the ink discharge.

Type:Water Based Ink
Printing Type:Digital printing
Place of Origin:Henan
Brand Name:TODOjet
Model Number:CMYKLcLmW
Key name:Textile Pigment ink 6 Color DTF Printer Ink For Inkjet Printer

Adjust the thermostat and timer of the heat press machine to the desired temperature and time.
1.Lay the substrate flat on the silicone plate, then place the offset heat transfer drawing on the substrate, and press the handle down firmly until it is completely closed.
2.When the time indicated for hot stamping is up, the buzzer will sound, and the handle will be lifted back to its original position.
3.If it is cold torn, the heat transfer paper should be torn off after cooling; if it is hot torn, the heat transfer paper should be torn off immediately after the hot stamping is completed.

The poor adhesion of the material pattern of the UV flatbed printer is a headache. The printed pattern is peeled off with a slight scratch. Even if the printing effect is even better, it has no shelf life and practicality. There are six reasons for this: temperature and humidity relations, ink deterioration, material problems, UV lamp problems, too fast speed,the ink is not dry, and residual cleaning liquid.

There are three main reasons for the failure of the UV flat printer main circuit: the relay is damaged, the electrical contact is poor, and the ground line and zero line are reversed. When encountering such a situation, the power must be cut off for the first time, and subsequent maintenance work must also be performed in a power off state.

The produced glue has the characteristics of water resistance, good fastness, fast drying speed, not easy to block the network, and does not affect the color of the ink, and is a new type of environmentally friendly material.

1. The compatibility between the main board of the printer and the print head/software is more stable
⒉ Board waveform corresponds to more precise color management and lower deviation
3. The printing of the white color nozzle is not offset, and the accuracy is higher
4. The life of the print head is more durable, and it is not easy to break the ink and pull the wire
5. The official after-sales service group can track and reply at any time

1.High-precision guide/platen roller: precise pressure paper to ensure the stability of the printed pattern
2.Ink tube: transparent ink tube, check the ink status, indicate the color
3.Dual-nozzle printing: each nozzle has eight rows of 180 nozzles, easy to install and adjust, and can output high-precision images of 1440dpi
4.Servo motor: Ensure good printing precision

The heat transfer film printer is not limited by the pattern, no matter how complicated the pattern is, it can be printed out, and the new TODOjet A3 DTF heat transfer printer provides 8-color, 7-color, 4-color ink configurations according to individual uses and purposes. Contains value-enhancing white inks and metallic silver inks that feature high-precision color reproduction.

Despite some limitations regarding adhesion to certain surfaces, crystal labels remain one of the best options for advertising customization due to their versatility, cost-effectiveness, and high-quality finish. For businesses looking to elevate their brand identity with personalized labels that make a lasting impression, AGP crystal labels offer the perfect solution. With strong adhesion, three-dimensional visual appeal, and a premium finish, crystal labels are setting the standard for innovative branding and advertising customization.

Using the shake powder could consider these procedures.
Dusting.
1.What is the powder sprinkled with?Hot melt powder, when the heat is sticky, after the formation of glue coating;
2.Why?Stick hot melt stick to the dry ink to help eventually form the coating;
3.How to sprinkle, sprinkle how fast?Can adjust the knob on the shake powder machine;
4.How much?The powder is about 2-3cm thick to stop sprinkling the powder.
Shaking.
1.Why shake powder?Shake off the excess powder on the ink and film adhesion, so that the powder is thin and evenly attached to the ink.
2.Shake powder speed.Depending on the situation, the knob on the condition machine, about 2-3 gear ok.
Drying.

1.Why drying?Melt the hot melt powder to create a reprint pattern coating;.
2.How long will it bake?Undefinite, depending on the specific situation, mainly to ensure that the pattern feels no powder, hot melt powder all melted into coating.
3.Temperature? 90-130 ° C is ok.

When using a UV DTF printer for custom transfers or personalized merchandise, the final print quality can be influenced by several key factors. Understanding these elements can help you achieve superior printing results, whether you’re printing on garments, promotional items, or other substrates. Below are the top factors to consider for optimizing the print quality of your UV DTF printing machine:

Our machine has plenty of advantages. The machine is equipped with a paper-shorting device. There is a lack of ink alarm inside each paint box. And our Ink System is Auto ink supply, white ink circulating and stirring. Meanwhile, the temperature control is indeed special among the machine in the market. More importantly, Hansen board. Power board integration is high, with good stability, and neat wiring and simple operation.

The reasons for the white color registration and color registration problems of uv flatbed printers are: the print head is not vertical, the print head is in a bad state, the height is wrong, the two-way is not adjusted properly, and the software data parameter is set. The manifested features are pattern leakage, image shift and dislocation.

DTF textile printing ink is highly compatible with Epson xp600 print head. You can directly print your designs on different textiles and fabrics using Direct to Film Ink technology.There is front and rear heating, auto ink supply, white ink circulating and stirring.

The UV Printing process involves special inks that have been formulated to dry quickly when exposed to ultraviolet (UV) light. As the paper (or other substrate) passes through the printing press and receives wet ink, it is immediately exposed to UV light.Please note that this technology required varnish printing, and its better use hard or neutral ink. The printing effect of uv film is more beautiful, and the colors are bright and diverse. Can be used on irregular hard surfaces.

Adopt the main board of the leading enterprise in the domestic textile industry – Hansen main board: use variable point technology to make the printing pattern more delicate and the color more vivid. The components of the textile printing and dyeing printing system include: main control board, spray car board, nozzle driver board, PC processing software, PLC control module, etc.