Powder Shaking And Heating Machine All-in-one Shaker Machine for A1 I3200 Printhead DTF Printer

According to the shape and function of the ironing board: flat pressing machine (mainly used for the collection of sizes and specifications of clothing and apparel fabrics).

When the temperature gets colder every year, the number of failures of UV printers will also increase. It is mainly concentrated in four aspects: blockage and disconnection of nozzles, solidification and condensing of consumables, electrostatic interference, and unstable voltage. How to prevent these situations in advance?

Powder shaking machine usually together with our 60cm DTF printer, it can keep continous automatic dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer.

The heat press machine can heat various heat presses on cotton, linen, chemical fiber and other fabrics by heat transfer, and can also perform heat treatment processes such as screen printing, mucilage, foaming, etc. Landscape patterns, etc. are baked on porcelain plates and metal plates, which are especially suitable for making medals, commemorative cards, cultural shirts, etc. It is economical and practical, and the patterns are exquisite. It is replacing traditional embroidery and screen printing, and the cost and effect are much lower and better than general embroidery and multi-color screen printing.

Powder machine usually come with DTF printer, for printed film powder coating and curing.Then the film can be transferred on any kind of fabric materials.

1. Use software draw the pictures , and then use the printer to print the pattern on the PET machine
2.Sprinkle an appropriate amount of hot melt poweron the printed PET film and shake off the excess hot melt power
3. Put the PET film on the heat transfer machine and back for 5-7 minutes ,until the hot melt powder melts , take out the PET film
4. Lay the T shirt flat on the heat transfer amchine and stick the sidesprinkled with hot melt powder on the T shirt for pattern

Industrial UV printers take digital images and print them directly onto a substrate. These machines utilize cyan, magenta, yellow, black, white and varnish UV inks to reproduce stunning graphics on a variety of materials such as plastic, glass, stainless steel, ceramic and more. Most of UV printer manufacturers recommend that buyers buy the specified ink from them, why is this?

Although UV printers can print patterns on the surface of hundreds or thousands of materials, due to the characteristics of the surface of different materials, the adhesion of UV ink, flexibility and other performance differences, it will lead to peeling, peeling, etc. on some materials. situation, which requires the use of UV coating to solve this problem.

Five Guarantees
1. Quality: no fading, strong stickiness
2. Factory: source manufacturers, innovation and worry-free
3. Team: one-to-one service, free design
4. Choice: a variety of crafts for you to choose
5. After-sale: quality problem, free re-send

The production of heat transfer clothing is a hot project that has only emerged in recent years, which is heat transfer technology. Thermal transfer heat transfer technology has a wide range of market applications, widely used in clothing, T-shirts, luggage, handbags, shoes and hats, socks, gloves, aprons, handicrafts and other fields. Production of heat transfer, high elasticity, good washing fastness, brilliant color.

Main products of TODOjet
DTF Printer and DTF Powder Oven (A3,60cm,120cm size) Widely used to customize the T-shirt, hoodie, scokes, shoes, bags, etc.

UV Flatbed Printer (3050,6040,UV6090,UV1350) Widely used in textile, plastic sheet, metal plate, acrylic sheet, wood board, leather, glass, phone case, ceramic tile, etc.

All kind of consumables for DTF solution DTF powder, DTF ink, DTF film, UV ink, UV AB film, etc

Flocking Printing
Flocking printing is a common method in the clothing printing industry known for its strong three-dimensional effect, fluffy feel, and comfortable texture, which distinguish it from other printing and hot stamping methods. The thickness is typically 0.7 mm.

The UV-curable ink is cured and adhered to the media or substrate by UV radiation. The print is already dried when it comes out of the printer, allowing a short delivery request to be met. Printing on non-absorbent materials, including plastic, glass, and metal, is available. To give shape to ideas, TODOjet offers a range of UV-curable ink products to meet demands from various industries

UV varnish is a special type of varnish that’s finished using an ultraviolet drying machine. It creates a more vivid, more luxurious and more tactile finish when compared to non-UV varnishes and adds an instant professional look to any printed project. Our UV 3050 Printers with 2 printheads support varnish printig, the uv 6090 Printers with 3 printheads could do this.Varnish is a coating that applies to your printed piece during or after printing. A varnish is added to a piece to enhance the look or to protect the piece from scuffing or scratching. Protect your print when handling or contact with moisture or chemicals.

The early heat transfers are not so much heat transfers as they are heat transfers. They are mainly popular slogans and characters. Later, they gradually developed into various vivid patterns.

The main purpose of the UV print head cleaning liquid is to clean the internal channels of the print head to keep it open and smooth the ink discharge.

Factory delivery: provide technical guidance ink/powder/heat transfer film offset heat transfer printer one-stop supply,Use the special paint ink for transfer film to print the pattern on the PET film, directly remove dust, no need to cut, no need to discharge waste, and the fast transfer of natural hollowing is suitable for any fabric.

-Hot melt powder with softable and stretchy (white and black powder for option)
-Wider color gamut and densensity, bright color of pigment ink
-High quality white and fluresent ink （Fr,Fg,Fy,Fm）
-Good release,low shrinkage, high temperature re

1.White ink with color ink: soft to the touch
2.No waste, just tear it off
3.Hollow pattern, no need to engrave, fine lines, small characters and fine dots can be printed naturally

Simple and easy operation
1. Select a picture
2. Click Print
3. Heat press machine
4. Finish the finished product

We will solve your “trouble”:

Printing method: digital heat transfer,
No plate making, simple process, short timeliness, low cost, low operation difficulty and high cost performance.

The poor adhesion of the material pattern of the UV flatbed printer is a headache. The printed pattern is peeled off with a slight scratch. Even if the printing effect is even better, it has no shelf life and practicality. There are six reasons for this: temperature and humidity relations, ink deterioration, material problems, UV lamp problems, too fast speed,the ink is not dry, and residual cleaning liquid.

-Environmentally friendly and non-toxic
-Support customization, free design
-High-definition printing, quality assurance
-Azo free, oeko-tex standard
-Choose TODOjet product quality and after-sales guarantee

In DTF printing:

Special pigment ink is applied to PET film.
A powdered glue is then applied to the back and heat cured for immediate or storage-ready use.
This method offers versatility across non-cotton materials and avoids the complexities of pre-treatment or plate-making required in traditional methods. DTF printers are often paired with powder dryer machines to enhance the printing process.

When using a UV DTF printer for custom transfers or personalized merchandise, the final print quality can be influenced by several key factors. Understanding these elements can help you achieve superior printing results, whether you’re printing on garments, promotional items, or other substrates. Below are the top factors to consider for optimizing the print quality of your UV DTF printing machine:

UV flatbed printers have pass trace, which is theoretically unavoidable, and mechanical errors cannot be eliminated to zero. But the higher the accuracy, the smaller the pass trace phenomenon and will not affect the printing quality. The cause of the pass trace of the pattern: the print feathering is too low, the two-way printing is too fast, the Y-axis belt is loose, the nozzle is in a bad state, and the ink is broken.

During the curing process, the hot melt powder may produce some gas, here we need the air purifier for cleaning. TODOjet can offer you one-stop solutions of DTF printing, such as the DTF printer, powder shaker machine,PET film, hot melt powder,pigment ink and so on.

Heat transfer machine operation process: adjust the time controller to the required time, put the transferred clothing on the lower ironing board, and then put the heat transfer paper (pay attention to the front and back of the heat transfer paper), press the handle down forcefully, Till the end.

The digital direct injection process of pure cotton paint, which has been developed for many years, is the most variable in digital printing at present, but its color, fastness and hand feel have been improved to varying degrees. Among them, the most innovative improvement is the combination of The silk screen paste process and the white ink direct injection process, these two process schemes have greatly increased the market share of the coating direct injection process.

No limit of fabric materials
No need pre-coating
CMYK+ White (Fluoresent color for option)
2pcs EPSON i3200-A1 (4 heads for option)
Printing width: 60cm
Printing Speed: 10~15sqm/h
Software: Maintop/Photoprint