Spot engraving-free waste-free offset dtf printer white ink direct spray heat transfer shake powder all-in-one machine

TODOjet A3 direct to film printer with 30cm width, equipped with two XP600 printhead support vent holes and fluoresent ink printing. This A3 DTF printer usually used for any garment fabric printing, compare to traditional DTG printer, this DTF printer no need pretreatment, which can improve the working efficiency. Its a new way that changed the T-shirt printing.

1. Dust removal and dust prevention
A tiny particle of dust can stop the precision equipment from working, or may make the film or print plate scrapped, so the placement environment of the production equipment is crucial.Therefore, we need to keep the environment clean and clean.
2. Electricity for equipment
The general working voltage is 220V or 380V, the current is a few amps to ten amps, and can not have large fluctuations.
3. Environmental temperature and humidity
Most of the ironing machine is composed of electronic components and integrated circuits, which is particularly sensitive to temperature and humidity. Too high and too low temperature and humidity will affect the service life of the equipment.Too high temperature will affect the heat dissipation of the equipment, and too low temperature may cause long time preheating of the equipment, and affect the use.

After-sales service is guaranteed nationwide, the official customer service phone is online 24 hours, and the technology has always been in the tie, and has never been surpassed!

Recently, heat transfer is widely used in garment printing.And in the market,we always see hot peel film and cold peel fim,even now also with warm peel film,but which one is best? Here we can do a analyze from different aspects

The appearance is simple, stable, the body-integrated design, the metal frame structure is adopted, the cold-rolled steel plate electrostatic spraying process is equipped with a switch, and the air volume and suction adjustment knobs are installed. The air volume and suction can be adjusted. The product is small in size and easy to move.

PET transfer film technology is widely used recently, and the application covers clothing, shoes and hats, toys, bags, bedding, daily necessities, etc. In the other hand,it can be transferred on hard materials like the wood board. Anyway,this new technology has gradually replaced the direct traditional printing, leading the trend of The Times.

Direct to film printing is an exciting addition to the inkjet garment decoration process that requires no pre-treatment even for white ink. More solution about DTF printing like reflective color printing or breathable function printing,kindly contact with TODOjet team.

DTF means direct to film printing,its an alternative printing process to DTG printer.As we all know that DTG is direct to garment printer,which is suitable for cotton fabrics printing, such as cotton T-shirt, POLO shirt printing. And DTF printer is suitable for all non-cotton fabrics printing,such as polyester, hat printing,shoes printing,canvas printing.

When it comes to personalized custom clothing printing, the DTF-T30 Printer has emerged as the top choice for startups and established businesses alike. In this article, we will explore the reasons why the DTF-T30 Printer is preferred by many and how it meets the demands of the industry. Read on to discover the key factors that set the DTF-T30 Printer apart.

Flocking Printing
Flocking printing is an innovative technique that involves applying short fibers of various materials such as rayon, cotton or wool to a surface coated with an adhesive. This process not only adds a luxurious velvet or suede-like texture to the material, but also allows for vibrant and customized colors to be achieved through dyeing. By incorporating flocking printing into your designs, you can effortlessly enhance the visual appeal and tactile experience of your printed projects.

TODOjet A3 DTF Pro printer is a DTF printer specially developed for customers who are looking for high quality machine and do not have large format producing needs.
This printer uses stable Epson Printheads (DUAL PRINTHEAD SYSTEM)
This model is more cost-effective than most printers on the market right now, purchasing from TODOjet means buying from the manufacturer directly.
It can works on both white and dark textiles and works with a variety of fabric styles (cotton, poly, blends, leathers, denim, and more).

Easy to operate, ready to use after installation
Low cost, high efficiency, quality assurance
Provide modern heat transfer equipment for entrepreneurs

Features:

Stable Compatibility: The enhanced integration between the printer motherboard and print head/software ensures reliable, long-term performance with efficient operation.
Precise Color Management: Advanced motherboard waveform design enables more accurate color control, minimizing color deviation for superior print results.
High-Precision White Ink Printing: White ink nozzles deliver precise printing with zero offset, significantly boosting printing accuracy.

It should be noted that the ink absorption is good. If you do not add a white background when printing very light and very light pictures, it will lead to insufficient sticky powder, resulting in some patterns remaining when you tear it.

No need to engrave waste and lamination, effectively improve production efficiency, unlimited patterns, natural hollowing is lighter, thinner and more breathable.

Environmentally friendly, no waste, small footprint, unlimited fabrics, soft and washable, suitable for personalized heat transfer customization and batch automated production of various fabrics.

You could try our A3 DTF Printer. Maintenance method of T-shirt and cotton textile after transfer printing?
1. Just transferred T blood will have a little hard, the feeling, you will become soft after washing.
2 The newly processed T-shirt must be cleaned up after 2 hours. Turn the clothes over to the reverse side and wash them.
3 Do not rub the surface of the T-shirt (the surface material does not attach dirt).
4 Do not wash with a detergent containing bleach.
5. Wash with warm or cold water below 40 C.
6 Try not to use a washing machine.
7 After washing, do not use the clothes dryer to shake dry.
8 Dry naturally and do not twist your clothes. Don’t expose your T-shirt in the sun.
9. If the clothes need to be scalded flat; dry can use medium temperature steam ironing (including elastic fiber can not be irat high temperature, so as not to damage the tissue structure of elastic fiber. influence
Clothing elasticity effect), do not iron directly on the pattern.
10 After Ironing. Do not plug clothings into narrow space, can use coat hanger county hang or flat spread, in order to maintain clothings flat appearance.

TODOjet offer you a brand new solution of digital PET transfer film color printing
-Saving Manpower
-No Engraving
-Widely Usage
-User Friendly
-No Waste Discharging

Direct-to-film printing is an advanced craft , which directly transfer designs from films to fabrics.The process of DTF printer is an innovative achievement compared to screen-printing.Faster and convenient new operation method.The primary feature of DTF is that the DTF printing machines are compatible with various materials and produce colorful ,durable and rich designs.

Chemical fiber or mixed light color clothes containing less than 70% cotton can be directly transferred by thermal sublimation, breathable without feel, image and overall effect is better than any imported film transfer paper, and the price is cheaper.
For 100% pure cotton, previously useful modifier way, use is very troublesome, often heating will be yellow. With the DTF printer, you can get the clothes you want.

New digital printing process-DTF
DTF is directly printed to film, and the digital printing process has significant advantages. One of the biggest benefits is that it can be used to print on white or dark T-shirts without pre-processing. This process supports printing on various fabrics with or without white ink.
Product name:Digital Heat transfer PET Film T-Shirt Printer
Print head number:1/2 pcs XP600
Media Type:PET Film (Premium Quality)
RIP software:Maintop/Photoprint
Printing Speed:3-10 sqm/h
Printing Color: CMYK+W
Max Printing Width :A3 size/ 310mm

The white ink stirring function ensures continuous circulation and stirring of the white ink, which effectively prevents ink precipitation and reduces the risk of printer failures. Additionally, this function guarantees stable white ink output upon startup, enhancing the overall printing quality and reliability.

DTF Printer can print any color labels, portrait photos, landscape patterns, etc. on T-shirts, jackets, etc.

Advantage:
-Steady peel strength
-Anti static coating treatment
-Competible water based ink
-Bright color, non-stick powder
-Azo free, oeko-tex standard

AGP S30 A3 UV DTF Printer Wholesale Price Hot Sale Epson l1600 Sticker Transfer Printing is a powerful direc to film printer. Boosts a ultravilot LED curing system, it will print fabulous sticker transfers for you.

TODOjet A3 DTF Printer has automaticlyprinting and cleaning function system,printing+heating+powdering+-drying in one system for DTF PET Film T-shirt Printer ,also called Digital Transfer Film Polyester Printer.
Now just go for inquityng our DTF PETFilm T-shirt Printer Digital Transfer FilmPolyester Printer.

DTF printing revolutionizes the business with at-home T-Shirt solution.
It provides a more modern alternative to the now-archaic methods of DTG printing, screen printing or sublimation.
Direct To Film a.k.a DTF delivers a printing service that gives the advantage to any person to print digital transfers to decorate dark and light t-shirts on cotton, polyester, all kind of blends, leather, nylon, and more without expensive equipment.

Platform upgrade: precision CNC aluminum alloy mute guide rail, lengthened stainless steel heating printing platform, printing film is more stable and does not arch film
Simple operation panel: simple operation, Chinese and English system keys, one-key cleaning of the nozzle and ink loading is more convenient, effectively improving work efficiency

1. Adjust the appropriate temperature and time:
The temperature range of thermal transfer is about 180-230°C, and the time is about 10-30 seconds. Before the formal batch transfer, a test should be done to determine the process parameters.
2. Adjust the appropriate color density
Adjust the color density in the computer to avoid the situation that the ink is too much and not easy to dry. After adjustment, you need to check the thermal transfer effect.

Pre-sale: With senior industry experience, analyze customer needs and future development, and customize the overall solution of recommended products and machines