uv flatbed printer hybrid

Is it reliable to judge the performance of UV flatbed printers by weight? the answer is negative. This is actually a misunderstanding that most people use to judge quality by weight. Here are a few misunderstandings.

When the temperature gets colder every year, the number of failures of UV printers will also increase. It is mainly concentrated in four aspects: blockage and disconnection of nozzles, solidification and condensing of consumables, electrostatic interference, and unstable voltage. How to prevent these situations in advance?

China’s UV printer industry has been developing for more than ten years, and it has basically reached a bottleneck in terms of flat-panel printing technology at this stage. Throughout these years, the evolution of nozzles has become a main line. Most UV printer manufacturers have started to change Epson nozzles, Seiko nozzles, Konica nozzles to Ricoh nozzles, Toshiba nozzles, Kyocera nozzles, and starlight nozzles. It is also based on the replacement of nozzles in Japan. The core point of the market is the cost-effectiveness of the print head, that is a better balance between speed, accuracy, life, and price.

I often hear two kinds of sounds. One is from the UV flatbed printer manufacturer. “Using the manufacturer’s UV ink, the life, smoothness of the print head, and post-printing color follow-up provide warranty. Without the manufacturer’s UV ink, the print head and ink path appear. System failure is not covered by the warranty. ” The other one is from the customer side “Can I not use your UV ink? The price is more expensive, so if there is a problem in the later stage, please pay your to solve it.”

There are 8 reasons for the failure of the uv flatbed printer, and there are 8 reasons for it. According to the difference in the design of uv flatbed printers of different manufacturers, there may be 10 reasons. There may be 6 different reasons. However, mastering the following 8 types can solve 99% of the failures of the nozzles not producing ink.

If the ink dots or lines per foot are used as the key factor for the print quality of UV printers, it seems a bit oversimplified. Other important factors have not been taken into account. Some factors are related to UV printer systems, and some are related to UV ink quality , Not specific to the print head.

T-shirt printers are also called T-shirt printing machine, digital printers, direct-injection printers, clothes printers, etc. If you look directly at the appearance, it is easy to confuse the two. Both sides have metal platforms, heads, and nozzles Wait, and the size of the appearance and the size of the UV flatbed printer are basically the same. But the two are not universal, and the specific differences are as follows:

The visual effects of UV printing have three-dimensional effects such as flat ordinary color printing, 3d, 4d, and 5d. Among them, ordinary color printing is also divided into two-color, four-color, six-color, eight-color, eleven-color and so on. The more spot color UV inks are used, the more delicate the pattern display.

UV flatbed printer safety equipment mainly includes three aspects: Electrical connection, ground wire, and mobile machine. Each part must be installed and banned accordingly. It must be strictly observed to prevent safety accidents.

The reasons for the white color registration and color registration problems of uv flatbed printers are: the print head is not vertical, the print head is in a bad state, the height is wrong, the two-way is not adjusted properly, and the software data parameter is set. The manifested features are pattern leakage, image shift and dislocation.

There are three main misunderstandings in the speed of UV flatbed printers: theoretical speed, speed in different modes, and actual production speed. What needs to be understood is that the speed in most sales man mouths only refers to the theoretical speed. A few professionals will mention the speed in different modes, but these are not the actual production speeds. The gap in the middle is at least Times to calculate.

There are three main reasons for the failure of the UV flat printer main circuit: the relay is damaged, the electrical contact is poor, and the ground line and zero line are reversed. When encountering such a situation, the power must be cut off for the first time, and subsequent maintenance work must also be performed in a power off state.

The fault of the uv flatbed printer software driver host engine is manifested in four aspects: host system fault, software damage, abnormal drive, and map software fault, all of which will directly cause the device to fail to print normally.

How to repair uv flatbed printer to save more money? Answer: No. This is obviously a joke. In fact, unless there is a major problem, there is no need to repair it in consideration of economic benefits ,then giving up. Of course, don’t expect that the equipment will not malfunction. This non-existent, once has a problem. What can be done is to solve it as soon as possible to avoid greater losses.

Type:Inkjet Printer
Condition:New
Plate Type:Roll-to-Roll Printer
Place of Origin:Henan, China
Automatic Grade:Automatic
Applicable Industries:Home Use, Retail, Printing Shops, Advertising Company

DM-2500UV works with 2-8pcs Ricoh Gen5 heads. It’s a high performance industrial 2.5m UV hybrid printer.

Say goodbye to the traditional printing mode to achieve one-time printing, saving time, labor and cost.It adopts an independent color correction management system to finely restore the 4096-level grayscales printed on different materials, and intelligently print 686 billion colors.

Greatly reduce noise during carriage moving and improve linear rail smooth-going, use life and lubricating efficiency.Printing materials: can print a variety of flat materials, outdoor 5-8 years without fading Application industry: sign industry, advertising industry, decoration industry, glass industry, iron plate metal industry, gift crafts industry, packaging industry.

Equipped with Teflon industrial mesh belt and high-precision servo control mesh belt feeding system to realize free switching between sheet material and roll materials printing.The Y-axis motion is squeezed by the upper and lower rubber rollers, and is matched with the pendulum structure for feeding to ensure accurate feeding when printing elastic materials and reduce stripes and passes line in printing.

Skriveren stålramme er tett og tykk, noe som ikke er lett å vri og deformere.Bleksystemet er utstyrt med en -nøkkel blekkpressesystem, som er praktisk å betjene, og kan realisere funksjonen til forskjellige fargetrykk separasjoner for å spare blekk. Slå av blekkskretsventilen automatisk for å forhindre blekklekkasje når skriveren er slått av.