TODOJet new powder machine with partition heating function

In scientific terms, Sublimation is the transition of a substance directly from a solid state to a gas state. It does not pass through the usual liquid state, and only occurs at specific temperatures and pressures. Heat transfer is a discipline of thermal engineering that concerns the generation, use, conversion, and exchange of thermal energy (heat) between physical systems. Mention Heat transfer, we need to mention the DTF printer specially. DTF Printer’s market is promising. Today we’ll tell you something about sublimation and heat transfer.

Flocking Printing
Flocking printing is a common method in the clothing printing industry known for its strong three-dimensional effect, fluffy feel, and comfortable texture, which distinguish it from other printing and hot stamping methods. The thickness is typically 0.7 mm.

UV varnish is a special type of varnish that’s finished using an ultraviolet drying machine. It creates a more vivid, more luxurious and more tactile finish when compared to non-UV varnishes and adds an instant professional look to any printed project. Our UV 3050 Printers with 2 printheads support varnish printig, the uv 6090 Printers with 3 printheads could do this.Varnish is a coating that applies to your printed piece during or after printing. A varnish is added to a piece to enhance the look or to protect the piece from scuffing or scratching. Protect your print when handling or contact with moisture or chemicals.

The early heat transfers are not so much heat transfers as they are heat transfers. They are mainly popular slogans and characters. Later, they gradually developed into various vivid patterns.

UV cold transfer film is an intermediate carrier, exists on the transfer paper or plastic base, carries the printed or printed pattern, and is used to transfer a layer of chemical elastic film on the printed article.

Daily maintenance is essential for keeping your UV DTF printer in top condition and ensuring high-quality prints for custom transfers, personalized merchandise, and other print applications. Proper maintenance helps avoid costly repairs, extends the lifespan of your UV DTF printing machine, and minimizes downtime. Here are some key daily maintenance steps you should incorporate into your routine for optimal print quality and machine performance.

About maintenance of Epson printheads, you mayhave many questions,here we can offer someuseful tips for your reference.

The visual effects of UV printing have three-dimensional effects such as flat ordinary color printing, 3d, 4d, and 5d. Among them, ordinary color printing is also divided into two-color, four-color, six-color, eight-color, eleven-color and so on. The more spot color UV inks are used, the more delicate the pattern display.

1. Significant Saving on printing cost.
2. Environmentally protective, no waste ink.
3. Smooth ink flow for better printing quality.

Recently, many people have asked what is the difference between white ink heat transfer and heat transfer? In short, both of them are suitable for clothing and textiles, but they are very different in terms of color fastness and craftsmanship. Today, we use these two common machines in the market to make a technical comparison. Let’s take a look at it. Where is the difference between the two.

Heat transfer machine operation process: adjust the time controller to the required time, put the transferred clothing on the lower ironing board, and then put the heat transfer paper (pay attention to the front and back of the heat transfer paper), press the handle down forcefully, Till the end.

Powder shaking machine usually together with our 60cm DTF printer, it can keep continous automatic dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer. After curing, you can store the printed PET film for heat transfer use.These released PET films are suitable for any fabric garment printing, like T-shirt printing,chemical fiber, non-woven fabric printing,linen printing,canvas printing,leather printing,silk printing,etc.

Industrial UV printers take digital images and print them directly onto a substrate. These machines utilize cyan, magenta, yellow, black, white and varnish UV inks to reproduce stunning graphics on a variety of materials such as plastic, glass, stainless steel, ceramic and more. Most of UV printer manufacturers recommend that buyers buy the specified ink from them, why is this?

There are three main misunderstandings in the speed of UV flatbed printers: theoretical speed, speed in different modes, and actual production speed. What needs to be understood is that the speed in most sales man mouths only refers to the theoretical speed. A few professionals will mention the speed in different modes, but these are not the actual production speeds. The gap in the middle is at least Times to calculate.

Shaking powder fixing machine
Accurate alignment of printed patterns
Hot melt adhesive powder is sprayed evenly
Shake powder quickly and efficiently
Automatic drying and color fixing

The faults of the UV flatbed printer reset are mainly concentrated in four aspects: the printing can be reset without response, the reset Z axis only rises or falls, the normal reset cannot be completed, and X always moves to the right during reset. The solution to each fault is different.

Consumable items:
-Hot melt powder with softable and stretchy (white and black powder for option)
-Wider color gamut and densensity, bright color of pigment ink
-High quality white and fluresent ink （Fr,Fg,Fy,Fm）
-Good release,low shrinkage, high temperature re

As professional DTF printer supplier, we can also offer you related powder shaking machine, full series powder heating and curing machine like 30cm width, 60cm width and also 120cm width can meet your different demand.

1.Up and down cap station,Better seal performance for the printhead
2.Temperature control,Front and back, 2 stage heating
3.Hiwin guide rail,Printing more stable and quiet
4.Good working performance,Fluorescent orange and green are support

Powder shaking machine usually together with our 60cm DTF printer, it can keep continous automatic dusting powder and curing the PET film during printing.The speed can match with 2 heads i3200 DTF printer. After curing, you can store the printed PET film for heat transfer use.These released PET films are suitable for any fabric garment printing, like T-shirt printing,chemical fiber, non-woven fabric printing,linen printing,canvas printing,leather printing,silk printing,etc.

Product type: Roll to roll DTF PET film printer
Brand : TODOjet
Color : C/M/Y/K+W (4 pcs head support fluoresent ink printing)
Coating material : Hot melt powder
Printhead : 2pcs I3200 printhead,max 4 pcs
Priniting resolution : 2400dpi
Priting size : 600mm wide
Printing speed : 18㎡–25㎡/h
Feature : All in one
Suitable on material : Cotton,polyster,nylon,EVA,swimsuit,leather
Related machine:Powder shaking and curing Machine

UV flatbed printers have pass trace, which is theoretically unavoidable, and mechanical errors cannot be eliminated to zero. But the higher the accuracy, the smaller the pass trace phenomenon and will not affect the printing quality. The cause of the pass trace of the pattern: the print feathering is too low, the two-way printing is too fast, the Y-axis belt is loose, the nozzle is in a bad state, and the ink is broken.

Small size,lower shipping cost
Auto powder-recycling system
Two Groups automatic correction devices
Three independent heating zones
Dual-motor take-up system

To understand the market prospects of UV printers, we can start from the three aspects of UV printer equipment itself, the materials that can be printed, and the applied industry.

I often hear two kinds of sounds. One is from the UV flatbed printer manufacturer. “Using the manufacturer’s UV ink, the life, smoothness of the print head, and post-printing color follow-up provide warranty. Without the manufacturer’s UV ink, the print head and ink path appear. System failure is not covered by the warranty. ” The other one is from the customer side “Can I not use your UV ink? The price is more expensive, so if there is a problem in the later stage, please pay your to solve it.”

High quality DTF shaker powder shaking dryer, usually together for XP600/4720/i3200 DTF printer or other DTF printing machine. Mainly used for hot melt dusting and curing during printing. We have different powder shaking machine can meet your different printing speed like 2 head printer powder shaker and 4 heads printer powder shaker.

1. Source manufacturer, free proofing, lifetime maintenance
2. Personalized customization, unlimited fabrics, suitable for pasting in various shapes
3. Simple operation, Liyin Lidry, one-time molding

The difference between white ink heat transfer and heat sublimation
The temperature and time of hot stamping are different:
Generally speaking, the hot stamping temperature of white ink heat transfer is about 160 degrees, and the time is about 13 seconds (the hot melt adhesive used by different manufacturers is different, the temperature and time of hot stamping may be different, but most of the values are in this range) , and the sublimation paper temperature is between 200-230 degrees, and the time is about 15-20 seconds.

UV AB Film material is waterproof and high temperature resistant, wear-resistant and scratch-resistant for daily use, bright color and clear details
UV Ink is low-odor, non-toxic, safe and secure, smooth printing without blocking the nozzle, rich

Before, if customers want to print on bottle mugs, they need to buy rotary clamp together with uv flatbed printer; Now, no need, UV DTF AB film helps transferring on bottles mugs, even irregular objects, without rotary clamp. Because of this feature, once UV DTF AB film lacunhed, they became hot sale.