What is difference between DTG printer and DTF printer?

When it comes to personalized custom clothing printing, the DTF-T30 Printer has emerged as the top choice for startups and established businesses alike. In this article, we will explore the reasons why the DTF-T30 Printer is preferred by many and how it meets the demands of the industry. Read on to discover the key factors that set the DTF-T30 Printer apart.

A3 new digital offset printer, we develop and produce independently, do not use Epson L1800 and 1390 modification, our machine structure is reasonable and completely similar to industrial machine structure, using PP color management software color does not cast color.

MATERIAL UPGRADE
Slightly elastic and resistant to pulling

CLASS A SCRAPER
The paste is stronger and the picture quality is more beautiful.

Lightfastness of transfer clothes: the color will not fade under direct sunlight.

Type: DTF Gradient Film Size: 60cm & 30cm*100m/roll Tear off Method: Cold Peel Warranty: 3 Years Note: Store in Dry & Damp-proof Environment

1.solution for white heat transfer, which is a subversive clothing heat transfer application process.
2.It solves the problem that the direct-jet printing process is picky on the fabricand the new heat transfer process does not limit the material transfer.
3.Don’t worry about color difference and fastness, the pattern is what you see is what you get.

Adjust the thermostat and timer of the heat press machine to the desired temperature and time.
1.Lay the substrate flat on the silicone plate, then place the offset heat transfer drawing on the substrate, and press the handle down firmly until it is completely closed.
2.When the time indicated for hot stamping is up, the buzzer will sound, and the handle will be lifted back to its original position.
3.If it is cold torn, the heat transfer paper should be torn off after cooling; if it is hot torn, the heat transfer paper should be torn off immediately after the hot stamping is completed.

1. The compatibility between the main board of the printer and the print head/software is more stable
⒉ Board waveform corresponds to more precise color management and lower deviation
3. The printing of the white color nozzle is not offset, and the accuracy is higher
4. The life of the print head is more durable, and it is not easy to break the ink and pull the wire
5. The official after-sales service group can track and reply at any time

High-speed nozzle/fine effect
No line breakage, good printing effect, full and delicate colors, stable printing effect, continuous ink, and no head clogging.

● Automatic A3 printing, gluing, and curing line for printing on light, color, and dark T-shirts.
● Printing is carried out on a special film with white ink in a mirror image, after which the finished film is transferred to a T-shirt in a heat press
● Manual application of glue is possible, however, for printing large runs it is preferable to use a roll-to-roll printing line
● The resulting image is highly resistant to washing, up to 25 washes
● The image is bright and saturated, pleasant to the touch
● Professional software ensures correct color reproduction
● Durable printer design allows up to 32 A3 T-shirts per hour

A variety of fabric printing to meet your needs All fabrics such as knitted, textile, nylon, non-woven, oxford, etc. can be hot stamped, which can easily achieve photo-level effects.

Bright colors
Simultaneous color and white printing
Hollow pattern without cutting.
Accurate alignment of printed patterns.
Sprinkle hot melt adhesive powder evenly.
Shake powder quickly, no powder will stick to other areas

TODOjet A3 DTF printer is such a magic machine! Why? Because it can print pretty much all kinds of fabric materials like cotton, silk, nylon, canvas, leather etc. It is small-size, cost-effective, high quality and high efficient so many customers start own business with this magic machine.

Powder dryer advantage:
A:Front heat plate
B:Two stage dryers
C:cold fan
D:auto-take up system
E:Rotating Touch screen

TODOjet offer you a brand new solution of digital PET transfer film color printing
-Saving Manpower
-No Engraving
-Widely Usage
-User Friendly
-No Waste Discharging

Every printing and imaging is beyond your imagination, save worry/labor/time, and upgrade new advantages.

Use the printing software of the white ink heat press machine to print the picture. This kind of white ink heat transfer should be equipped with at least two nozzles, one nozzle for white ink and one nozzle for color ink. There are also four nozzles, two for white ink and two for color ink. The speed is fast, but the accuracy will be slightly reduced. During the printing process, the printer first prints the color map on the special release printing film, and then prints a layer of white ink on the color map.

1.DTF printer adopts EPSON F1080/XP600 printhead,the speed can reach to 18m/h (30cm width).
2.Complete T-shirt printing solution,low-cost invest,big profits.
3.Convenient,high efficiency and good stability,saving space and time.
4.Excellent printing effect,picture printed is soft, washable and stretchable.
5.Full color printing, light and dark t shirt printing.White ink circulation system.
6.DTF t-shirt printer, All-in-one system,no pre-coating,powder recycle-free.

Can print pictures on any material. Such as: T-shirts, towels, scarves, cotton clothes, etc.Free intermediate consumables. Such as: transfer paper, crystal glue, crystal film, high temperature adhesive tape, heat transfer equipment.Realize computer data output to T-shirt printer and print directly on the object!No matter how fast your business develops, it can meet your mass production needs.

Advantages of heat transfer
-Lower cost, easy to use, more cost-effective-
One piece/mass production
Bright colors
Customized patterns
Rich details
Knitted, woven, nylon, non-woven, Oxford, etc., a variety of fabrics can be hot stamped.

Why do white ink stamping printers skew colors? What are the causes of printer color shift? In fact, the printer supplies are also an important factor in whether the printing color deviation, in the printing supplies performance, if the printer supplies, you can use high quality, good brand reputation of the ink, printing film, hot melt powder. In addition to consumables lead to color cast problems and the following reasons, the following come with me to understand the main five main reasons for the color cast of the hot stamping printer.

Before, people use DTG printer to print Tshirts directly, now DTF technology is hot and popular this year, it’s printing on film first, then transferring on Tshirts. Compare to dtg, dtf has faster speed, and no limit about fabrics. DTG is suitable for only cotton Tshirts, but for DTF, cotton, silk, polyster, canvas etc. almost all are ok.

Chemical fiber or mixed light color clothes containing less than 70% cotton can be directly transferred by thermal sublimation, breathable without feel, image and overall effect is better than any imported film transfer paper, and the price is cheaper.
For 100% pure cotton, previously useful modifier way, use is very troublesome, often heating will be yellow. With the DTF printer, you can get the clothes you want.

Introducing our Wholesale Price 30cm UV DTF Printer AGP F30, featuring the Epson F1080 Printhead and Integrated Laminator for Glass, Cup Wraps, Stickers, and more.

What is the difference between heat transfer printing and heat press
1. Different operating temperatures

1. Thermal transfer printing: The temperature of thermal transfer printing is between 200-230 degrees.

2. Heat press: The temperature of heat press is controlled between 130-150 degrees.

TODOjet is one of the professional direct to film printer manufacturers,can offer you one-stop solution in garment transfer printing technology.

TODOjet can offer wholesale price and OEM service. Recently this 30cm A3 DTF printer is really popular, two heads with fast speed and more stable than L1800 modified printer.

The powder shaker is rotated at a high speed and the heat transfer material is hit, so that the powder on the material will be shaken more evenly and the excess powder on the material will not be adsorbed on the invalid picture.

The demand for personalized and small-batch printing on ready-to-wear garments is becoming stronger day by day. Our company’s dtf a3 printers have people’s demand for individual dressing.

ذاتي ڪسٽمائيز ماڊل ڊسپلي، ذاتي ٽي شرٽ، ٽيم يونيفارم، ڪم يونيفارم، ڪلاس يونيفارم، جرسي، سامان، وغيره.